-
Similar Topics
-
By Rmillerdesigns
Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
-
By Timbo
I never see videos of hear of people taking these things to the big trails. Do you ? I just got one and want to.
-
-
By Davescat
I have an 2019 Caterpillar cuv85. Which is the same as the prowler pro and the tracker800sx and prob many more. What is everyone doing for a lift? I need more ground clearance. I have seen 1 lift available. But is this the only thing I can do?
-
By screasy
I am replacing a wet clutch on my Axis 750. I wanted to add a slug kit to improve performance. The Slugs I received fit into the holes on the wet clutch, but they are not a tight fit. They fall all the way to the bottom, and when I put the spring plate back on, they will rattle back and forth if I turn the clutch upside down. I don't think they will come out, but if they move freely inside the holes is that a problem? All of the videos I have seen people have to press the slugs in flush, and these definitely float freely. There is not a great amount of space around the slug, but it is moving freely. Thoughts?
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.