Quantcast
Jump to content

Joyner CV Axle parts available


Recommended Posts

  • 3 months later...

I need right rear cv axel complete from end to end.please and I need like last week just kidding I’m sure you do all the leg work so if takes a little longer I get it but I cannot find a rear CVC axle for the 650 commando anywhere besides you please give me one coming or can I have one now thank you Tyson wood

Link to comment
Share on other sites

On 5/26/2023 at 7:13 AM, Tyson wood said:

I need right rear cv axel complete from end to end.please and I need like last week just kidding I’m sure you do all the leg work so if takes a little longer I get it but I cannot find a rear CVC axle for the 650 commando anywhere besides you please give me one coming or can I have one now thank you Tyson wood

Hi Tyson, 

The rear cv axle for 650 Commando is still available like yesterday

It is in South Carolina now and if you buy, it will be sent by UPS. 

So, if you buy earlier, you get it earlier, no need long time waiting. 

Would you please send me email at [email protected] for further discussing? 

Thanks 

Casey/ Leaf Asia 

2023-05-29

S650.03.02.02.00-2.jpg

  • Like 1
Link to comment
Share on other sites

  • 4 months later...
  • 5 weeks later...
On 11/13/2023 at 11:00 AM, rcampneysr said:

I’m looking for passenger side rear axle for Joyner 650 cc Sand Viper. Would you have any available? 
Thank you. 

Hi Rcampneysr, 

I don't have complete cv axle for 650 Sand Viper but I do have both inner and outter cv joint rebuild kits for both rear left and rear right cv axles.  

CV Joint rebuild kit photos as attached. 

Please send me email to [email protected]  CC: [email protected] for further discussion. Thanks 

Casey/ Leaf Asia 

2023-11-15

15803 inner cv joint kit (1).jpg

15803 inner cv joint kit (2).jpg

15803 inner cv joint kit (3).jpg

14274 outter rebuild kit.jpg

Link to comment
Share on other sites

1 hour ago, rcampneysr said:

I’ve been watching for your email. Have you sent one that I may have missed? Thanks.

Hi Rcampneysr, 

I did answer your email from [email protected]. Looks like the email hasn't been sent to you sucessfully or denied by your email system. 

I will try use [email protected] to send email to you again. 

Let's keep both sides update here in this forum untill emails can be received with no problem. 

Thanks 

Have a great day

Casey /  Leaf Asia 

2023-11-17

Link to comment
Share on other sites

6 minutes ago, CYJSP2009 said:

Hi Rcampneysr, 

I did answer your email from [email protected]. Looks like the email hasn't been sent to you sucessfully or denied by your email system. 

I will try use [email protected] to send email to you again. 

Let's keep both sides update here in this forum untill emails can be received with no problem. 

Thanks 

Have a great day

Casey /  Leaf Asia 

2023-11-17

Hi Rcampeneysr, 

I 've just sent you an email from [email protected]. Please kindly check and let me know if you receive the email. Thanks 

Casey / Leaf Asia

2023-11-17

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By Randyh79
      Just bought a Bad Boy Bandit 750. Need to change the oil and filter. Any suggestions would be greatly appreciated. I'm pretty sure this a Hisun 750 Sector even though it says it's a Bad Boy. I'll include pics soon.  
    • By CYJSP2009
      Dear Friends, 
      2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 
      1.  S650.03.02.02.00 ---Joyner 650 Commando Rear
      2. TR1100.03.01.03.00 --- Joyner Trooper Front 
      3. TR1100.03.02.03.00 --- Joyner Trooper Rear
      4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 
      5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 
      6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left
      7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      Attached are the part photos for reference. 
      Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 
      Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 
      There will be special discount availabe for deals completed within July 2022.  
      Buy 1 piece: Get 5% discount, 
      Buy 2 pieces: get 10% discount.
      Buy 3 pieces: get 15% discount, 
      Buy 4 and more than 4 pieces: get 20% discount. 
      Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 
      Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( [email protected]) .  Payment commission paid by the buyer. 
      Interested parties, please contact [email protected]
      Thanks
      Good Luck
      Casey / Leaf Asia
      July-07-2022
       
       
       














    • By Keith k
      Just got this kymco 450i Uxv from a guy, drove it around before I paid. Got home drove around town a little while the next day and it started squealing and amd didn’t want to go. Got to looking at the clutch, that’s were the noise is coming from, the primarily sounds like. Maybe a bearing in there cause the grinding noise and it only makes the noise when you go to move.
×
×
  • Create New...