Getting my prowler to a running stage and can't figure out why it won't idle without throttle. Also see fuel spitting out air intake while running. High speed runs rough as well. I've done many things (that were needed) but it hasn't helped. New plug, rings (120 lbs compression luke warm), timing chain, valve job. Even tried a cheap new carb. Thinking I may be off a tooth on the timing but it looks pretty dang close. anyone see this issue before?
By moto mutts
Ahoy there, me hearties!
Set yer sights on the grand spectacle known as the Shiver Me Timber SXS Fun Run! Cast yer lot with the crew of UTV Offroad Adventures as we embark on a daring escapade to seek both booty and trails in the Moabi Regional Park. This be where the Colorado River flows, a mere 11 leagues southeast of Needles, California. So don yer finest eye patches and make way with your trusty parrot!
Behold, UTV Offroad Adventures proudly presents the legendary Shiver Me Timber SXS Fun Run! 'Tis an event that would make even the bravest buccaneers quiver with excitement! Aye, this three-day revelry promises a safe and organized escapade like no other. Venture forth and uncover hidden treasures aplenty as ye navigate your off-road vessel along waterfront trails, through shifting sand dunes, ancient bridges, and tunnels of yore. Come Friday night, there'll be a ride spanning a hearty 15 nautical miles. On both Saturday and Sunday, ye shall have the privilege to choose from two separate rides, ranging betwixt 50 to 90 nautical miles. And fear not, for the festivities shall include feasts, campfires, quick-draw poker, raffles, and an abundance of merriment, laughter, and revelry. This be an affair for sailors of all ages and UTV backgrounds. Join us in the quick-draw poker rounds, where every piece of eight we gather goes to aid local charities.
Our epic off-road voyage shall commence from none other than Pirate Cove Resort. Nestled amidst the swaying palms and embraced by pristine, sun-kissed beaches along the Colorado River, all of this be situated upon the storied path of Historic Route 66. 'Tis an oasis where RV encampments and cabin rentals await, alongside UTV rentals and more treasures than ye can fathom.
For those wielding mobile devices: For full event particulars, the location chart, the course itinerary, and to enlist yer name among the crew, set yer sights upon the Menu option above, arrr!
Go to www.utvoffroadadventures.com for all the info
you're sick of chinese Crap but really can't afford the good OEM part?
Starter on the mule, i finally replaced the old D&B electrical starter (on august 28th) on it that was at least 5 years old with probably a million starts on it and apparently D&B no longer makes it/sells it, so i bought a $53 starter from CHYNA on amazon.. on august 19th, well here it is barely 1.5 months later, it clicks several times before it will spin over, all connections were good and i tested the key switch, and trigger wire voltage as well as the starter relay according to the service manual and they all check out. usually a tap with a hammer or if i turn the key back and forth fast several times it will kick in and start. would it be worth my time to remove the starter and lube it??
I've got the Denso and Kawasaki part numbers but boy... $$$$$$$$$$$$$$$$$$$
even a Reman denso is $230.
does anyone know of a decent aftermarket starter maker that might have one?
i've 12.5 volts at the big cable, and i get the same at the trigger wire as the manual states, but when its in F or R i get no voltage at the trigger, so i know the Neutral safety is working properly.
and if anyone can find one the DB starter was 190-542 18450