Quantcast
Jump to content

Finely got one for hunting!


BOW4UM

Recommended Posts

Live in GA, hunt in KS and I picked up a 2017 Massimo MSU500 and so far just love this thing. I'm lightly customizing it now. Definitely better than my old Grizzly 660 for my current KS hunting.

Ill be picking your brains for info so thanks in advance to you pros for all your help and advice.

  • Like 1
Link to comment
Share on other sites

Yep, much better for hauling stands and everything else.  Although it's a little harder to load a big buck in the dump bed than it was to drag one across the atv.  I picked up a chain-on hoist after last season!

https://www.amazon.com/Viking-Solutions-VS-VHK001-Game-Processing/dp/B00KTMXNTY/ref=sr_1_6?crid=1YOHK2JY2Q450&keywords=hoist+game&qid=1652957591&sprefix=hoist+game%2Caps%2C155&sr=8-6

 

  • Like 2
Link to comment
Share on other sites

4 hours ago, TapBoss said:

That's a good idea for my property. I like to hang them a day or 2 and that would make it a lot easier then puling up!

 

 

Yep, much better for hauling stands and everything else.  Although it's a little harder to load a big buck in the dump bed than it was to drag one across the atv.  I picked up a chain-on hoist after last season!

https://www.amazon.com/Viking-Solutions-VS-VHK001-Game-Processing/dp/B00KTMXNTY/ref=sr_1_6?crid=1YOHK2JY2Q450&keywords=hoist+game&qid=1652957591&sprefix=hoist+game%2Caps%2C155&sr=8-6

 

 

Link to comment
Share on other sites

  • 1 month later...

https-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblochttps-::a.co:d:8lSc0fi.weblocI have an MSU 800 bought new in 2016. Have worked the daylights out of it, 6 yrs. The thing basically lives in a ft or so of tanic, acidic swamp water. Just yesterday had to change the ECU. Bought from Motorcycle Doctor. They go from $160. at MD to over $400. Their delivery was 4 days, great company. Other than that 1 set rear tires, wheel bearings and little things like that which I consider wear items. Been a fantastic machine. I like the side by side and the fact it is smaller than most other brands. 

Have hauled out dozens of hogs and in last 2 yrs 6 deer. I use a game sled, for lack of better description. Just roll the deer, hog in it, throw a rope around the hitch. Screw lifting it on the body. When I get out to the truck I haver a small Block & Tackle in truck bed, simple pull the game up a plank into the truck bed. No lifting for this old man!!!

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.
    • By great8redsfan
      Okay folks. I have a low power issue. Been like this for a few years. Place I work at bought 3 and all have lost most of the pulling power.  They gave them away after local shop worked on one for 3 months and it had great power for about 1 month and then crap. They replaced throttle body, fuel injector, spark plug and IAC motor. Seat belt switches have wires cut and left open so no seat belt warning light anymore. It revs to 6k rpm in neutral but when put in gear and take off in low it just doesn’t seem to want to go anymore. Running 93 octane fuel with Stabil.  Any ideas greatly appreciated. I dont have a scan tool but no codes on dash. If held to floor it pops a little and runs almost 5K rpm but if I let off pedal about an inch it smoothed out and revs up to 6k rpm. 
    • By htrotte
      #1   While troubleshooting an issue with temp warning light I discovered another temp switch mounted in the pipe going to the head  The two switches are literally 6 inches apart.  Does anyone know what this third switch is used for?  If i can figure out how I will post pictures.
      Author #2   Finally got the pictures took.  See the photo and tell me if you know what the switch on the right is.
      It looks to be factory and I know the girl who bought it new and she didn't install it.
      I can't find anything on it in any manual i have looked at.  Any help would be appreciated.

    • By joel b
      i purchased a brand new massimo tboss 410 and from day 1 it wont operate in reverse.  When i pop in reverse and give it gas it will die out.  when i pop in reverse sometimes in will die right away (before giving any gas) and 1 time out of 100 when i pop in reverse it will operate perfectly fine.   and yes, it operates perfectly dine in normal drive H and L.  any thoughts??   when i called the dealer i got it from they had no idea.  
×
×
  • Create New...