Quantcast
Jump to content


Recommended Posts

Posted

Dear Friends, 

2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 

1.  S650.03.02.02.00 ---Joyner 650 Commando Rear

2. TR1100.03.01.03.00 --- Joyner Trooper Front 

3. TR1100.03.02.03.00 --- Joyner Trooper Rear

4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 

5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 

6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left

7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit

8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit

Attached are the part photos for reference. 

Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 

Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 

There will be special discount availabe for deals completed within July 2022.  

Buy 1 piece: Get 5% discount, 

Buy 2 pieces: get 10% discount.

Buy 3 pieces: get 15% discount, 

Buy 4 and more than 4 pieces: get 20% discount. 

Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 

Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( [email protected]) .  Payment commission paid by the buyer. 

Interested parties, please contact [email protected]

Thanks

Good Luck

Casey / Leaf Asia

July-07-2022

 

 

 

D650.03.02.03.00-1.jpg

D650.03.02.03.00-2.JPG

D650.03.02.02.00-1.jpg

D650.03.02.02.00-2.jpg

S650.03.02.02.00-1.jpg

S650.03.02.02.00-2.jpg

SV800.03.02.01.00-1.jpg

SV800.03.02.01.00-2.jpg

TR1100.03.01.03.00-1.jpg

TR1100.03.01.03.00-2.jpg

TR1100.03.02.03.00-1.jpg

TR1100.03.02.03.00-2.jpg

650 SS 800 viper outer cv joint rebuild kit.jpg

800 viper inner cv joint rebuild kit.jpg

  • 2 weeks later...
Posted

Dear Friends, 

The 2022 Joyner CV Axles and CV Joint rebuild kits will arrive at  Spartanburg SC this week. 

To make sure that most of you get the brand new CV Axles and rebuild kits at better cost,  we'd expand the special offer period till the end of July 2022. 

Beside the discount listed before, we would offer special discount for CV Boots  ( USD12/ piece)  

To proceed order and payment, please contact  [email protected]

 

  • 1 month later...
  • 3 months later...
  • 5 months later...
Posted
16 hours ago, Haley said:

I am looking for a rear axle for a 2007 joyner sandviper 800 cc any suggestions?

 

Hi Harley, 

Please confirm it is a rear left or rear right cv axle you need. Thanks. 

I have complete rear left cv axle (SV800.03.02.01.00) photo as attached. If you need rear right cv axle. I have both inner and outter cv joint rebuild kits for 800 Viper. 

Further discussion welcome to email me at [email protected]

Thanks 

Casey/ Leaf Asia 

2023-05-09

SV800.03.02.01.00-2.jpg

650 SS 800 viper outer cv joint rebuild kit.jpg

15803 inner cv joint kit (1).jpg

  • 2 weeks later...
Posted
18 hours ago, Cristian Mihuti said:

Hi, 

 

Axles for 08 joyner 800 

interested in both sides please. Let me know

Thanks!

Hi Cristian

Please let me know your buggy is 800 Renegade or 800 Viper or 800 Mini Viper. 

Please send email to [email protected].  I will check and quote to you. 

Thanks 

Casey/ Leaf Asia 

2023-05-29

  • 3 weeks later...
  • 2 weeks later...
Posted
On 6/14/2023 at 9:42 PM, CYJSP2009 said:

Hi TPC, 

I have some front cv axle for Trooper. Please refer to attached product photos. 

Please send me email to [email protected] for furether discussing. Thanks. 

TR1100.03.01.03.00-1.jpg

TR1100.03.01.03.00-2.jpg

Do they fit 2009 joyner trooper t2 

Posted

Unfortunately had to part with the SV1100 but Casey is a great parts provider. Got multiple parts from him and even had some made up. Fast responses, fast shipping, excellent to do business with. I wish him nothing but the best he’s got all kinds of parts for different models. Send him an email! 

  • 1 month later...
Posted
2 hours ago, slagathoar said:

Looking for all 4 for a 2009 Trooper T2. Are these still available?

Hi Slagathoar, 

Yes, all cv axles for Trooper are still available.  

Welcome to send me email at [email protected] for further discussion. 

Thanks 

Casey/ Leaf Asia 

2023-08-20

  • 2 months later...
Posted
On 11/14/2023 at 1:13 AM, IndianaSandViper800 said:
On 5/9/2023 at 7:11 PM, Haley said:

Has anyone order parts from the Casey guy? Is there a website he has? Is the email posted legit? I need a driver side cv axle for a sand viper 800.. and want to know this is a reliable resource 

Hi Indianasandviper800 

The mentioned joyner sand viper 800 driver rear cv axle is available. Part nmber for this axle is SV800.03.02.01.00

Please refer to product photos for this axle

Please email me at [email protected]  CC to ylf0302@hotmail.com for further discussion.  

Thanks 

Best regards

Casey/ Leaf Asia 

2023-11-15

SV800.03.02.01.00-1.jpg

SV800.03.02.01.00-2.jpg

  • 2 months later...
Posted
18 hours ago, Meghan Croft said:

Hi Casey I have a Joyner renegade r2 and I need a rear driver side axle how much would it cost and do you have a website or how can I contact you to order 

Hi Meghan, 

Rear cv axle for Renegade 800 (R2/R4)  S800.03.02.02.00 is still available. 

Main specs:  Total length is 582-627 mm ( 25.4mm= 1 inch), Outer spline teeth count: 30 teeth, Inner spline teeth count: 32 teeth.

Please kindly send me an email to [email protected] for further discussion.  Thanks 

Casey ( [email protected]

2024-02-12

 

S800.03.02..02.00-R2   LF-261 (1).jpg

S800.03.02..02.00-R2   LF-261 (4).jpg

  • 2 weeks later...
Posted
10 hours ago, Zane Levitz said:

Hi I have a 2009 Joyner sandviper 800cc. I need a left cv axle either both rebuild ends or whole thing if possible?

Thanks, Zane

Hi Zane, 

Both complete cv axle and inner and outer rebuid kits are available.  Please kindly send me an email to [email protected] for further discussion. Thanks 

Casey/ Leaf Asia 

2024-02-23

  • 1 month later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Topics

    • By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • By nrggaragebuilds
      2004 250DL DIRT DEVIL. Hey y’all, I already know this is a long shot. But I am looking for a the “prick gear” assembly that makes reverse work for my external reverse gearbox. OEM PN D250.08.103 and its assembly. I bought the kart as a basket case, but I saw that the reverse box was present so I was optimistic.  Upon starting working on the buggy I realized there was a block off plate in plate of there the normal gear would be. If my understanding is correct that means the transmission no longer has reverse gear. I figured it’s just a standard bevel gear and I could probably find a gear to make work, but I don’t want to spend the time making all the other housing parts to shim the gear perfectly. Has anyone spare parts, or figured out an aftermarket solution from McMaster? I already know it’ll be a challenge to get this box to be happy again, but figured I would ask  
    • By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
×
×
  • Create New...