Quantcast
Jump to content

jaybrown

Members
  • Posts

    17
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by jaybrown

  1. jaybrown

    jaybrown

  2. no gonna use the internal parts from the ltd to make my motor run
  3. chain driven cam picking up a kawi ltd 454 motor and carbs this weekend and gonna tear it down to see if it will work
  4. no push rods which is good as its a doubble over head cam
  5. single pipe from 2 cylinders??????
  6. ok let me know im pretty sure in 2 weeks i wont have the bottom end done what i meant by the exhuast pipe is mine is a twin where the exhaust leaves the head what does the pipe look like where it leaves the head to the muffler?
  7. cylinder head is great what does the pipe look like from the head to the muffler? is it a y pipe or header?
  8. nothing wrong with my crank case
  9. here is the motor number i think the ltd 454 parts will work
  10. i will check and post pictures this weekend
  11. valve guides look even i dont have lube yet as i want to get all the parts first and not sure about the cam compresion release
  12. the piston is scored but not that bad i think a new set of rings and it will be ok the valves and cam all look good where can i find a shop manual for it so i can see how this motor all goes back together?
  13. does the 450 kawi 450 bike motor have the same carbs as this motor?
  14. cylinder walls are in great shape
  15. ok also looking for the carbs as well
  16. so i just started looking at the motor i have in parts and found the piston rod is bent so im looking for a piston rod and crank bearings and ring if anyone has some im intrested and a manual as well, my crank is good and the cylinders are good as well not sure how this happened
  17. So i just picked up a 1991 mule 1000 that i know nothing about is there anything i should be looking out for? like is it hard to find parts for this model and is there anything thqt went wrong in that year of model? i just want to know some genral idea of what i have bought
×
×
  • Create New...