The Picker

New part ordered.

Ran the engine after and noticed  exhaust vapor coming out of a crack in the intake manifold after i stopped the engine after running it for a couple of minutes.

Will try air first and post results.

Just another thought, could you use your air nozzle to try air on the area to see if it changes the engine?

Do not have any thing in trigger spray.

Can i use wd40 with a straw?

Is there a way to test for air leaks?

There looks like a crack in the rubber on the intake gasket between engine and carb.

Have  a 400 trv that is back firing and seem to loose gas supply on times and will not idle. It has a new plug and cleaned the air filter. Will air supply to fuel system do this?

Now I have one more problem , the caliber stayed partly on and turned the rotor got red and caliber got hot enough it blew the brake line.

I have a 2011 700 nordik with all new brakes and rotors and master cylinder. My problem is the back brakes are making a noise just like when brake pads and worn down to metal on metal.

I was thinking valves seals. It always starts on the first or second role which would think good compression. How many valves does it have and is there a way to test valve seals?

I have a  2011 700 that smokes blue smoke upon start up after all night mostly and is making away with about 200ml of oil on 80kilometers.

It only has a rear center brake system

I have done this process before on cars but was wondering if there was a sequence it must be done has I have used 1 litre of fluid and brakes are no better.

Just replaced master brake cylinder and have been bleeding the brakes with no success. Is there any sequence in which they have to be done?

It had a anti freeze leak and temp sensor was gone also.

There is a place in northern Ontario that has a good selection of Hisun parts called ATV Wharehouse. They also advertise on ebay.

I checked the fuse and it is good to the fan . The machine is the same has the power max 700 rough rider.

My 700nk nordik is over heating  The cooling fan is not cutting in but checked it on a battery and it works. Also it went low on antifreeze but did not take any from full reserve tank.Ifilled it up but could not see a leak. So could I hook fan up direct?

I have a nordik 700 k that is over heating and it seems the cooling fan is not working but checked it on a battery and it works fine. When I got home the antifreeze was low but filled it up and see no leaks but noticed the reserve tank was full and it did not take any from it.