Just Mark

while i didn't eliminate the box, i did relocate the intake to the back of the passenger side and added a motorcycle filter for extra measure... seems to be working so far

Needed switches for fog lights for Axis 500 UTV. Designed a 3D printed switch panel - this mounts to where the flat part of the dash looks like switches should have been there from the factory. Uses standard Toyota OEM style switches.  Printed in matte PLA filament. 

You can download from printables.com

https://www.printables.com/model/524695-axis-500-switch-panel

On 6/20/2023 at 11:12 PM, Mark Kantor said:

mine was the same- a replaceent fuse fixed it but now the fuse blows whenever i turn the headlight switch to the first position... more troubleshooting to do

So i solved my fuse-popping issue- i disconnected the blue wire from the turn signal assembly. Now my headlights function properly. According to the wiring diagram, the blue wire is an illumination wire that runs to the cluster and i assume the "night indicator" on the diagram equates to "headlight on".  I am not sure what in the cluster would be the culprit, if anyone has ideas, let me know.  For now, i like having headlights...

On 1/8/2023 at 11:14 AM, Bob Nichols said:

Just purchased a used Axis 500 with 3 miles on it, excellent condition. The horn and headlights do not work.

I have not checked the fusebox yet (just found the location). Is there any identification of the wiring harness from the steering column

to the fuse box? Im expecting that if a fuse blew, something caused it.

 

Bob

mine was the same- a replaceent fuse fixed it but now the fuse blows whenever i turn the headlight switch to the first position... more troubleshooting to do