Quantcast
Jump to content

Axis 700 RPM at Various Speeds

sdaustin6483
 Share

Recommended Posts

  • Alex changed the title to Axis 700 RPM at Various Speeds
  • 2 weeks later...
scott ryan Rookie

scott ryan

Posted
Posted
On 4/12/2023 at 11:33 AM, sdaustin6483 said:

I am new to the Axis 700, but not only does it seem very loud, but the rpms seem high at any speed. For example, 4400 at 30mph. Is this normal for this machine?

I have the 750. Seems pretty normal from my experience. Hauling weight and incline really impact rpm needed to maintain and increase speed in both H and L gear.  Of course they exaggerate the machines capabilities in advertising so you might feel like it shouldn't be running wide open at 30 mph, but it takes ideal conditions (unrealistic) to hit peak performance as advertised. Be sure you follow breakin guide before running hard, or problems sure to follow. It'll mellow out after breakin and first fluid changes/adjustments. Keep an eye on temp, those temp switches are known for going bad early.  Easy fix, but if you go hot during breakin it's gonna hurt.  Hope this eases your mind a little. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • JimS409
      2011 Hisun 700
      By JimS409
      I picked up this Hisun 700cc for a good deal. no crank no start unit 1900 miles on it. Put a new battery and starter solenoid fired right up but sounded rough some kind of rattle/clunk noise.  Does anyone know what this noise could be? Couldn't get a better video of it running as i don't want to risk doing more damage. Drained the oil it looks good no metal in it. 

      445374820_7315077208620291_6073155782020130975_n.mp4  
    • buckrub
      trying to finish assembly "new" 2021 Coleman ut 400
      By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • Anthony Vigil
      2021 Hisun 700 grease fittings
      By Anthony Vigil
      Can anyone tell me how they grease the drivelines ?  Can’t grease the u joints. Do you need to take the driveline off ? 
      And are they easy to take off?
      Thanks
    • tim hughes
      2021 axis 500 belt issues
      By tim hughes
      does any one else have a slipping belt on the hisun ...i put new wet clutch one way bearing new belt, cleaned primary and secondary and still get slight slippage
    • Randyh79
      Hi new member, Randy from East Texas
      By Randyh79
      Just bought a Bad Boy Bandit 750. Need to change the oil and filter. Any suggestions would be greatly appreciated. I'm pretty sure this a Hisun 750 Sector even though it says it's a Bad Boy. I'll include pics soon.  

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...