Quantcast
Jump to content

2009 Polaris Ranger 700 Will Not Start

Gtommyholland
 Share

Recommended Posts

Gtommyholland Newbie

Gtommyholland

Posted
Posted

Good morning folks I have a 2009 ranger 700 XP that will not start. It’s not getting power 12 votes to the fuel pump or the coil. The code that shows up is 4341. installed a brand new ECU And still no power to the Coil or and fuel pump.. All of the fuses are good and all the relays are good when I tested the wire going to the fuel pump it shows 4 Amps. Ran a hot wire to the fuel pump and it works fine. The ECU I installed is part number 4011599. Also the speedometer goes to 70 mph when I switch it on and then drops to 40 mph and back-and-forth. I have checked the ignition switch and all the connections for the ECU and the Coil. Any help will be appreciated.

Link to comment
Share on other sites
  • Alex changed the title to 2009 Polaris Ranger 700 Will Not Start
  • 2 weeks later...
Gtommyholland Newbie

Gtommyholland

Posted
  • Author
Posted
On 6/9/2023 at 12:06 PM, Gtommyholland said:

Good morning folks I have a 2009 ranger 700 XP that will not start. It’s not getting power 12 votes to the fuel pump or the coil. The code that shows up is 4341. installed a brand new ECU And still no power to the Coil or and fuel pump.. All of the fuses are good and all the relays are good when I tested the wire going to the fuel pump it shows 4 Amps. Ran a hot wire to the fuel pump and it works fine. The ECU I installed is part number 4011599. Also the speedometer goes to 70 mph when I switch it on and then drops to 40 mph and back-and-forth. I have checked the ignition switch and all the connections for the ECU and the Coil. Any help will be appreciated.

Just a follow up on ranger 700efi, replaced ECU with a new one, carried it to a local Extreme Motor Sport shop and had it programmed. Runs great now but it won’t idle. RPMs at around 650, then dies. Any idea?

Link to comment
Share on other sites
  • 1 month later...
rohn bold Newbie

rohn bold

Posted
Posted

If your ATV has spark and fuel, there are a few things you can check to determine the cause of the problem with Polaris Ranger. The fuel may be struggling to get from the tank to the engine. This could be due to a clogged fuel line, a faulty pump, or a blocked filter. Another possibility is that the spark plug isn't firing correctly.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • buckrub
      trying to finish assembly "new" 2021 Coleman ut 400
      By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • Randyh79
      Hi new member, Randy from East Texas
      By Randyh79
      Just bought a Bad Boy Bandit 750. Need to change the oil and filter. Any suggestions would be greatly appreciated. I'm pretty sure this a Hisun 750 Sector even though it says it's a Bad Boy. I'll include pics soon.  
    • Kidrock
      2014 bennche bighorn 700 efi
      By Kidrock
      I got a 2014 bennche bighorn 700 efi it gets fire it’s getting gas but just won’t start up and half way backfires through the air box what would cause that problem I need all help I can get please and thanks
    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • MOTORHEAD1959
      Coleman Powersports Youth 125cc ATV won't start
      By MOTORHEAD1959
      ATV just clicks when trying to start. Battery is good, has a new starter, and all the wiring looks good. any suggestions on where to go from here? thanks 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...