Quantcast
Jump to content

Prepurchase help?

Huntmastr1
 Share

Recommended Posts

Huntmastr1 Newbie

Huntmastr1

Posted
Posted

Hello all,

I am new here as I am trying to purchase a new to me machine to use on our farm and timber land.

I am torn between a 2019 Polaris 570 Full size (Windshield and cover)with 1000 miles and a very clean 2013 Polaris Ranger XP900 LE EPS with 2200 miles. Windshield, rear glass, cover, winch, new tires and front shocks.

The XP900 does cost more but is larger and better equipped. The 570 is priced extremely low which could allow for the accessories to be purchased to equal the 900, but it still would not be the XP900 LE EPS in aminities.

I am open and gratefull for any advice that can help me get this settled and move on to other things.

 

Thanks in advance,

Jeff

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Michigan sport.
      Michigan Emergency Brake Road legal Requirement.
      By Michigan sport.
      I'm sure many of you are aware of Michigan's emergency brake requirement.  I'm wondering if anyone has a good solution. 
      Beyond paying the few fab places $$$$.. I'm curious is there another rear caliper with e brake style that would interchange with slight mods to  the Maverick sport rear mounting bracket?
    • Mike Turner
      Don’t buy a LandMaster UTV from a private seller because the dealer won’t service it because you didn’t purchase it from them.
      By Mike Turner
      After 5 years my 2016,  650LandMaster is needing normal wear and tear service. But I can’t find a dealer service center to perform any of the work because I didn’t purchase the UTV from them. “I’m not going to help you” I’m told, “find someone else”. And apparently there’s not a damn thing I can do about it. 
    • Hisun .500
      Wiring harness is a mess has anyone ever tore it all out and only put in the basics. Power ,ignition ,starter, stator and regulator
      By Hisun .500
      So my hisun 500 is tore up and all the wiring is wasted i was wondering can i pull out all the wiring and just put in the. Basics .please help
    • Bennche x4
      Has anybody put portals on there bennche x4
      By Bennche x4
      Has anybody put portals on there bennche x4
    • robwork9
      Massimo T-Boss 410 has lost all electrical power
      By robwork9
      Hopefully someone out there is a T-Boss 410 electrics expert or a Massimo mechanic is viewing this. I parked my 410 and it was working great. I came back a week later and attempted to crank it and nothing. Turned the key and no power. Figured it was a bad/low battery so I charged it. Still nothing. Attempted to jump start it and still nothing. Usually when I put the key in and turn it to the first position, the display comes on and I hear the ECU and other items boot. Now it is doing nothing. 
      I slowly went through the electrical system and found the main fuse attached to the starter relay, part 71602 (pic 1) blown. I figured replacing this fuse would fix my problem. It didn't. I then ordered a new starter relay thinking maybe that part had gone bad and caused the fuse to blow, but a new relay did not fix the problem. 
      I have found a work around for starting the machine. If I take one of the purple/black leads (pic 2) and insert one of them in the bottom right of the starter relay (pic 1 and 3) then the machine will get power even with the key in the off position.  I'm bypassing something but don't know what. I can use my right hand to hold the wire against the lower right of the starter relay, reach over and hold the brake with my foot, then take my left hand and turn the key and it will crank. As soon as I remove the wire from the relay the machine shuts down. I have even removed the power distributor box and it will still get power when I touch the wire to the relay. Of course this is not the way it should work but if I can't solve this problem somehow I may just have to rig a connector to the relay and bypass whatever is causing the electrical issue. Massimo has told me the purple/black wires on my model are not used.
      Any help in figuring what my problem may be or other items I can try?
      v/r,
      Rw
       



UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...