Quantcast
Jump to content

Massimo Buck 400 overheating

KMart

By KMart
in UTV General Discussion

 Share

Recommended Posts

KMart Newbie

KMart

Posted
Posted

I have a Massimo 400 Buck that overheats and the antifreeze blows out of the motor everywhere! I don’t have to be doing anything but just driving through the field.  It only has 26 miles on it.  I don’t think the fan is turning to cool the motor.  Any ideas how to fix this?

Link to comment
Share on other sites
  • 2 weeks later...
  • 1 month later...
ibike Newbie

ibike

Posted
Posted

If it’s anything like mine the connectors are kinda junky and don’t always make good contact. Reseat all concerned connectors and make sure they are contacting good. My 4wd wouldn’t engage, had 12vdc to the connector and 26.5 ohms on the front diff magnetic coil. It had flat pins in the male side of the connector so I gave a bit of a twist to them and it’s been working fine since. 
have you solved your overheating problem?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • wnc woods
      Coleman ut400 add lower gear
      By wnc woods
      Is it possible to add a low gear to the Coleman ut400? If so please help. Ty
    • great8redsfan
      2017 Challenger 500 No power on take off or hills
      By great8redsfan
      Okay folks. I have a low power issue. Been like this for a few years. Place I work at bought 3 and all have lost most of the pulling power.  They gave them away after local shop worked on one for 3 months and it had great power for about 1 month and then crap. They replaced throttle body, fuel injector, spark plug and IAC motor. Seat belt switches have wires cut and left open so no seat belt warning light anymore. It revs to 6k rpm in neutral but when put in gear and take off in low it just doesn’t seem to want to go anymore. Running 93 octane fuel with Stabil.  Any ideas greatly appreciated. I dont have a scan tool but no codes on dash. If held to floor it pops a little and runs almost 5K rpm but if I let off pedal about an inch it smoothed out and revs up to 6k rpm. 
    • skittle021
      Super Weird Problem with Primary Shave/Clutch...
      By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





    • JSmojo
      Massimo quality and maintenance
      By JSmojo
      I've been looking at various types of UTVs in the 400-700cc range. It seems that Massimo has a really good price point but I don't know much about their reliability and availability of parts. Been looking specifically at their T-Boss 550. I've heard the parts might be an issue because the network is smaller, but couldn't find much info from owners.
      Here are a few specific questions about them
      1. In your opinion, are the reliable? Specifically, have you hand any parts break that in your mind shouldn't have? 
      2. If you had one and got rid of it, what was the reason? 
      3. If you don't recommend Massimo, what would you recommend (even if it costs a little more)?
      4. How easy is it to find a place to service them? How easy is it to get parts if you want to service it yourself? 
      If you have any other advice, I would appreciate it. I'm also looking at the Hisun Sector 550.
    • MJG
      Looking to Purchase 2008 Joyner Renegade
      By MJG
      Hello, 
      I found an 08 Renegade for sale and looking to purchase it.  I haven’t heard too much about these machines and any insight would be much appreciated.  Are they good machines?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...