Quantcast
Jump to content


Recommended Posts

Posted

What would cause the Temp warning light to come on very dim the minute I start my joyner? Would it be a ground or faulty sensor? :blink:

Big Red.

Welcome,I dont have an answer for you but someone who does will chime in soon.We hve many people on here with the knowledge that will be of help.

Posted

Thanks ricksrb,

Hope some one has an answer. Also does your fan come on right when you start or does it only come on when it's needed?

It comes on at starting,if you turn the key to on position(just before the starter engages) it comes on for a few seconds then shuts off .Hope that makes sense.Didnt ask before but what joyner do you have?

Posted

It's a T4. My fan comes on when you turn the key to the start postion, then turns off, but then when you start it it comes on right away. I was woundering if your's was the same?

Posted

It's a T4. My fan comes on when you turn the key to the start postion, then turns off, but then when you start it it comes on right away. I was woundering if your's was the same?

yep,mines the same.all that way from what i understand.where do you ride?

Posted

yep,mines the same.all that way from what i understand.where do you ride?

Actually the Trooper is my Brothers, he left it at my place for the winter for me to do some "Up Grades". I have spent most of my time fabing up a power steering kit, installing a marine stereo system, cleaning about 100lbs of mud out of it and fixing a few minor things like the breather lines and Air Filter locations. I live in Manitoba and he lives in Alberta, both provinces have awesome places to go riding.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • By nrggaragebuilds
      2004 250DL DIRT DEVIL. Hey y’all, I already know this is a long shot. But I am looking for a the “prick gear” assembly that makes reverse work for my external reverse gearbox. OEM PN D250.08.103 and its assembly. I bought the kart as a basket case, but I saw that the reverse box was present so I was optimistic.  Upon starting working on the buggy I realized there was a block off plate in plate of there the normal gear would be. If my understanding is correct that means the transmission no longer has reverse gear. I figured it’s just a standard bevel gear and I could probably find a gear to make work, but I don’t want to spend the time making all the other housing parts to shim the gear perfectly. Has anyone spare parts, or figured out an aftermarket solution from McMaster? I already know it’ll be a challenge to get this box to be happy again, but figured I would ask  
    • By Mountainman
      Radiator fan on 2018 textron havoc won’t come on
    • By mfitzner
      Cranks after installing a jumper wire to ignition switch to get power but will not start
      Have spark and fuel pump runs
       
    • By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


×
×
  • Create New...