Quantcast
Jump to content

Alex

Mud Nationals

Recommended Posts



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By blissman20
      Hey guys, just to give you a bit of back story here first.  I used to ride big mud machines and SxS in the swamp.  Went through a divorce and lost almost everything.  What I got to keep was a snowmobile that I had for years and never rode anymore and wasn’t worth much to me so I decided to try trading it for more or less any UTV/SxS I could.  Well that landed me here, I just traded it for a 2008 Kandi KD650 which is a direct clone of the Joyner Commando 650.  The machine is in rough shape but runs and drives.  I have a few things to repair on it. (Seized choke cable, seized Ignition, and needs a voltage regulator). Going to to princess auto today to pick up a choke cable, and ignition, I have a voltage regulator from an old project that I will wire in.  
      The only thing I am wondering about is the rear end.  The guy I traded it for told me only one rear tire will spin when in 2 wd.  Is that the way all of these are is do  I need to rip it apart.  Also is there any aftermarket support for rear axles or axles that will fit that can be cut down and sleeved and rewelded.  Buddy there did some rednecking with a Polaris axle but not sure how strong it is. 




    • By rh242603
      Hello-
       
      New to the forum so luckily there is some help out there lol. Recently bought a 2008 Joyner 1600cc sand viper and loving it. Took it out and had a little accident with a tree stump lol. The stump hit directly on my passenger side tie rod end and broke the heim joint that connects the tie rod end to the wheel. Does anyone know the size of the adjustable heim joint so I can order one? I am having a hard time sourcing one quickly. I am also guessing since it is an outter tie rod end, that it is LH pitched rather than RH? thanks for any help anyone can provide. This is again for the outter tie rod end heim joint that snapped. Thanks
    • By Travis Sparks
      can someone tell me where best place to buy 2008 t2 joyner rear end
    • By jjln50
      Thanks for the add. I have a chance to buy a 2008 Big Muddy sxs70 with 500 hours. Owners says needs head gasket as getting water in oil but has not over headed,does not knock or smoke. Price sounds real good . I have no problem changing head gasket but but does it sound to be that simple? Thanks for any help.
    • By Charles Newton Jr.
      Are the yamaha rhino rear axles the same I have a 2008 big muddy made by hisun and the rear axles for hisun are expensive and the rhino is about half the price? Thanks if anyone has info


×
×
  • Create New...