Quantcast
Jump to content


Differential upgrade kits to be available

Guest Lenny

By Guest Lenny
in Joyner UTV SxS Forum

 Share

Recommended Posts

Guest Lenny

Guest Lenny

Posted
Posted

I have ordered everything I need for a new run of differential kits for the Trooper. I'm making a limited number of them so if your interested, let me know. They will be $135 per kit includint shipping to the continental USA and Canada. Two kits will be needed for both the front and rear differentials. This kit solves a lot of serious problems with the stock differential including the ring gear bolt shearing problem, the spider gear pin coming out problem, pinion gear to ring gear alignment problem and general undesirable slop through out the differential internal mating parts and shafts. Forum members get a $10 discount per kit if purchased from me directly and not through Ebay. Each kit comes with very clear and well detailed instructions with lots of instructional pictures.

Lenny

Guest Lenny

Guest Lenny

Posted
Posted

We should be able to start shipping out Differential upgrade kits the first part of next week. Unless someone post a question or something that requires a response by me, I will not be posting under this differential upgrade topic again. I don't feel it's appropriate to use the forum as a sales billboard and only mentioned the kits here because so many of the forum members have asked about the kits. You can still order them as a forum member and get the $10 discount per kit provided you order directly from me and not through Ebay. This and other items I offer are on Ebay. Thanks to everyone.

Lenny

Kinarfi Veteran

Kinarfi

Posted
Posted

We should be able to start shipping out Differential upgrade kits the first part of next week. Unless someone post a question or something that requires a response by me, I will not be posting under this differential upgrade topic again. I don't feel it's appropriate to use the forum as a sales billboard and only mentioned the kits here because so many of the forum members have asked about the kits. You can still order them as a forum member and get the $10 discount per kit provided you order directly from me and not through Ebay. This and other items I offer are on Ebay. Thanks to everyone.

Lenny

When you get them on ebay, I suggest you add one more post with a ebay link, I think it would be appropriate, since you are making the for forum members.

Kinarfi

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • CSM_Retired
      Kioti K9 Power Dump Kit
      By CSM_Retired
      Has anyone installed the power dump on a Kioti K9? If so, does it eliminate the safety lock? Does it work well?
      Thanks for your input
    • BigWave
      2019 hisun won't run
      By BigWave
      I turned off the key and then tried to start it a minute later and it would not start. I changed out the fuel filter and the injector. still nothing. if i have the injector pulled out and close to the hole the injector will spray fuel into the hole and it will run but the minute you put the injector in it will die. any idea's please
       
       
      Bigwave
       
    • Gerald Dillman
      2008 Joyner trooper transmission parts
      By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...