Quantcast
Jump to content


Size checked my Cage Mod today!

rocmoc

By rocmoc
in Joyner UTV SxS Forum

 Share

Recommended Posts

rocmoc Grand Master

rocmoc

Posted
Posted

Went for a ride today. My 6 foot son is visiting and had no trouble fitting in the seats of my Trooper. He had more than 3 inches between the top of his head and the roof. Passenger hand hold fit him as well as my 5'5" better 3/4's. Absolutely no problem entering and exiting. He did not even have the seat adjusted all the way towards the rear. Trooper preformed great. Had a couple of situations where full front & rear lockers were REQUIRED. Can't wait until we have an event where you can see & sit in it. Weather has been prefect for riding. Thunderstorms have been passing thu and keeping the dust down. Not enough rain to create MUD, LOL!

rocmoc n AZ/Baja

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • Big Red Dog
      2009 Rhino 700 won't idle well
      By Big Red Dog
      Bought my 2009 Yamaha Rhino, (fuel injected of course), recently from the original owner. Only had 500 miles and 70hrs. Starts reliably, however, it will not idle but about 50% of the time. Also, when driving slow in low or high, that is to say, relatively low rpms and below about 10 mph, it bucks and almost wants to die..... not smooth at all. However, at speed (say 12-15 mph or more) it runs very well, like it should. Any ideas?
    • TimsBrickHouse
      Hisun / Axis Warranty How many others have had this problem
      By TimsBrickHouse
      DO NOT BUY ANY THING FROM HISUN Period! I had the axis 700 for 2 months when a rat or squirrel ate both wiring harnesses. (Main & ECM)Wanna know why? Because the manufacture of these things in their infinite wisdom use either, a soybean oil or a peanut oil to run the wires through the the wire loom. Hmmm i wonder why they would be inclined to eat the wires. So now I have $10K machine that I've only had for 2 months when all this happened and they will not warranty it at all. It is going to cost me $800 to $1000 to get this fixed. Here is a link to a video showing where we took our Hisun notice how many are there:
       
      https://photos.app.goo.gl/2FdniAoCyvTJMKae7
       
      So counting mine, there are 16 of Hisun Axis on the lot that i took in for authorized dealer, with the exact same problem, plus other troubles that the mechanic explained to me. This particular place told me they are not going to work on them anymore. I will be posting this in as many places as possible to reach the masses. I hope its worth Hisun!
    • Greg Kilgore
      How messed-up is this. Think head gasket is blown
      By Greg Kilgore
      I'm 99.9% sure head gasket is blown.
      Don't have coolant in oil. That a good thing. But think coolant is getting in combustion chamber. 
      I did compression test.
      Got 120psi walked away. Came back to 105psi 15 minutes later.
      How hard is it to replace?
      https://youtu.be/N31mOtOPuKI?si=nSnuF4-weRU2T10t
      Advise?
    • mrpro
      Coleman UT400 Better Lights?
      By mrpro
      Have a Coleman UT400 and the headlights are terrible.  What should I consider to make it so I can see well when driving in the dark?  
    • phxbird57
      great day for a ride
      By phxbird57

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...