Quantcast
Jump to content


2016 cub cadet challenger efi fuel pump

Sisco

By Sisco
in Cub Cadet UTV SxS Forum

 Share

Recommended Posts

  • 5 weeks later...
NDV45 Rookie

NDV45

Posted
Posted

Not sure of what you  need,  Are you talking about the rubber sleeve on the pump?  If so I cannot help you but You might try contacting the sellers on eBay they might help you.  Sorry I shouldn't have responded.

NDV45 Rookie

NDV45

Posted
Posted

I am fighting a fuel pump problem.  I have changed everything, Pump , Regulator, Filter It will start run any where you want to go.  Park it turnit off and the fuel pump will not come on due to low voltage.  Any on have any ideas?

NDV45 Rookie

NDV45

Posted
Posted

yes Battery is good and it is charging.  Mine is a 2008 Tracker and it was funny changed pump drove it and parked it.  Next day fuel pump not working no voltage to pump.  Found a relay that no one knows any thing about shows a picture of something in the manual;, but no item number.  There is also two fuses that are no listed in the parts manual.  The maintenance manual I have for this unit has a publication of 2006.  My unit is a 2008.  Things sure changed.

I'm Sorry I said I could not help you I may have lied to you.   I have a foam rubber wrapping that came on my old pump.  The rubber is still usable if you need one.  Let me know.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Robert Hamilton
      Ruesch parts
      By Robert Hamilton
      i am looking for front brake calipers and brakes for my 2008 ruesch xr side by side
      Can anybody help me
      Thanks bob
    • esmarkey
      2018 cub cadet 750 challenger clutch issues?
      By esmarkey
      Hi, I purchased a used Cub Cadet 750 Challenger that seemed like the belt was slipping so I put a new belt in.  It still acts like the belt is slipping but now I am thinking it is the clutch? 
      What is the best way to remedy this problem? 
      Can the clutch be rebuilt?
      Are there aftermarket clutches available? 
    • paul allen
      2016 wildcat tail front axle rubber boot
      By paul allen
      right front axle cv joint boot keeps getting torn up from the inside out....the stock one was damaged from a stick...i have replaced  the axle 4 times with aftermarket axles that fit fine..after 4-5 miles of riding even on grass.the outer boot get torn up from the inside out...all 4 brand new alxes...bearings are fine nothing bent everything fits just fine....nothing seems to be binding.....any thoughts?????
       
       
      thanks...pa
       
    • Burk
      2021 Axis(Hisun) 700 Will not fire up
      By Burk
      I have a 2021 Axis(Hisun) 700 from Lowes. Will not start. Checked starter, solenoid, spark plug and fuel pump. Everything seems to be fine. The motor turns over and will try to start but just will not. Battery is also good. Frustrated!
    • Kierobi
      MSU 500 Fuel Pump Ground
      By Kierobi
      Have a MSU 500 that we got from my wife's uncle a while back. We've had it running and hauling around the property but it stopped a few months ago after what I thought was running out of gas and I'm just getting to looking into it. 
      Had fuel to the injector but nothing coming out the injector so swapped with new injector and installed inline filter in the supply hose from fuel pump. Tried again and still nothing but noticed this time that I can't hear the fuel pump priming. 
      Pulled off the electrical connection and I'm getting 12V to the fuel pump but it won't run. Put it on a test bench and got it to run so put test lamp between +ve and -ve terminals on the connector and nothing. Checked against the passenger seat securing post and get a light. 
      Tried chasing the wire back and think that the ground is through the ECU but not 100% sure. Can someone confirm for me? And if it is through the ECU, is the ECU just grounded against the frame or is it wired through to the battery?
      Thanks in advance and hope this all make sense!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...