Hello! New too the UTV Board..
-
Similar Topics
-
By SteveMO
Folks:
I live on 11 acres that demands a bit of maintenance, and co-own a large farm a couple of hours away that I hunt on (professionals do the farming). My mowing/brush control/trail maintenance duties are handled by a 57" rough cut mower (Kunz brand), and I also drag logs and pull sprayers and seeders for food plots and such.
I've been using a pair of ATV's for decades to handle this work - a 750 for when I need real power (or need both machines at the same time when I have help) and a 500 cc with fixed rear axle for most duties.
Some of the places I need to work are VERY rough, and very three-dimensional, with steep ups and downs and some side-hilling I've learned the hard way not to try with my independent rear suspension 750, but handle with ease with my fixed rear suspension 500.
I've decided I want to sell the 750 and replace it with a UTV that I hope to use as my main workhorse. If anyone makes a working UTV that fits my specs that's what I'm gonna do. This is an all-work machine, I don't do any recreational riding so don't care about things like top speed.
So looking for advice on what models might handle what I'm looking for:
Gotta have:
2 passenger (1 row)
selectable 4wd
Power steering
Selectable gearing (not CVT)
Power-assisted dump bed
Engine cooling adequate for all-day slow-speed work in the summertime. Like towing a 700lb mower at 4mph all day in 100° weather)
Beefy tow rating, including tonque weight. Nobody ever mentions tongue weight because that exposes how crappy independent rear suspension is for towing safely in rough terrain.
Really want:
Selectable locking diff
Fixed rear axle (Isolates tongue weight from rear suspension. Holds more stable & consistent center of gravity than IRS over side-slopes and other complex terrain, and keeps geometry and suspension response consistent over wide range of tongue-weight of towed loads)
Slow speed cruise control (Factory option or aftermarket, covering at least 4mph - 10mph. For calibrated spraying and controlled mowing speed.
Muffler designed for quiet operation for comfortable all-day use, and to minimize disturbance for getting to hunting grounds. Not concerned about normal motor noise, but don't want something specifically piped to "sound fun".
Any advice on brands or models I'm most likely to have luck with?
-
By jewettperkins
Does anyone know the part number for the stator and flywheel on the 2015 intimidator 750 gas? It has a kohler Ech730-3036 engine.
-
By Robert B
Going down a 20 deg hill engine is holding UTV back. Then something releases like going into Neutral and makes a loud clacking noise. Have to use brake to slow UTV down. Then once level it shifts back into gear. Have done shift extension does not pop out of gear.
-
By moto mutts
Get ready to rev up your engines for an unforgettable weekend of off-road excitement at the Nashty Nation UTV JAM, proudly brought to you by Nash Powersports and UTV Offroad Adventures. This exhilarating event is set to deliver a perfect fusion of heart-pounding UTV rides, vibrant parties, and unforgettable camping experiences all beneath the stunning desert night sky. Hosted at the iconic Flying E Ranch in Wickenburg, AZ, attendees can look forward to a unique opportunity to connect with key players in the industry while embracing a carefree atmosphere focused entirely on having a blast.
UTV Offroad Adventures will be leading daily UTV rides through the awe-inspiring Arizona desert, guiding you deep into the historic mining terrain for an action-packed expedition like no other.
Feast on mouthwatering on-site meals that encompass breakfast, lunch, and dinner, all while soaking in the captivating ambiance. As the sun sets, nights will come alive with drinks, live music, crackling bonfires, and the harmonious sound of laughter filling the air. This event is a harmonious blend of relaxation, off-road adventure, and laid-back enjoyment.
Mark your calendars for November 17th to 19th and be sure to join us at the Nashty Nation UTV Jam. This is your chance to immerse yourself in an exceptional experience where relaxation and excitement seamlessly merge with SxS fun and boundless adventure.
Go to www.utvoffroadadventures.com to sign up
Check out the promo video
https://youtu.be/5whaclSrhq0?si=Dzk5em_sS3NU4O2j
-
By Stan Morton
My 2018 XG-850-SL starter died yesterday. The old part number from Kubota is E7153-11732 which has been superceed by part # EG881-63010. I am looking for an aftermarket starter because the Kubota retail price for the starter starts at $550 and upwards toward $850. If anyone has gone down this road before and has found an aftermarket starter ~ please share with me. We own a ranch and this thing is used every single day and is sorely missed when it is down for maintenance. Kind Regards, ~ Stan
-
-
-
Similar Tagged Content
-
- 0 replies
- 4,586 views
-
-
Gallery Images
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.