Quantcast
Jump to content

Tie rod ends

charlie

By charlie
in Joyner UTV SxS Forum

 Share

Recommended Posts

nocturnalsixer Rising Star

nocturnalsixer

Posted
Posted
Hey guys anyone know we're to get tie tod ends Jmc is out of them right now and not sure I wanna call sb. I know Lenny u got pretty crafty with a set up! I have one that's little loose

What u mean by little loose?

Mine are "little loose" also and i thought those was bad so i ordered new set of ball joints and tie rods, they also was "little loose" i thought that was weird because whenever i get ball joint or tie rod for any automotive vehicle...those are very stiff and hard to move like it's very good..why isn't trooper ball joints and tie rods tight when new like that i wonder?

Sent from my DROID RAZR using Tapatalk 2

Link to comment
Share on other sites
Guest Lenny

Guest Lenny

Posted
Posted

Thats why I made the mods to adapt mine to automotive ones. I have no play in my steering and it is staying that way. There is a post somewhere in this forum of what and how I made the change.

Lenny

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Copperline
      Coleman 550 Loose Timing Chain
      By Copperline
      I have a Coleman 550 (hisun). Wouldnt start and was sucking instead of blowing through the spark plug hole. Got to the timing chain and it was very loose and for sure the timing was way off. Got the tensioner off and set it to TDC and got the cam gear back aligned. Put the chain back on and set the tensioner as instructed and the chain is still very loose. I extended the tensioner as far as it would go to test and the chain is still loose. 
      Any ideas what could be broken or wrong? Why would the chain be so loose?
       
       
    • Kingfish
      Anyone know of a US online retailer for the E1 Discover batteries
      By Kingfish
      I've had a battery failure and need one replacement.  The local distributor told me it might take up to four weeks to get one.  I'd like to order one in sooner than that if possible.  Any help would be appreciated.
    • Haskellz
      Hello guys
      By Haskellz
      Hello guys!! I just joined the forum so there are so many things I don't know yet, I hope to have the help of the boards, and I really want to get to know you all on the forum.
    • AL F
      I HAVE 2004 POLARIS RANGER 700XP EFI NEED CORRECT FUEL INJECTOR
      By AL F
      CAN'T FIND ANYTHING UNDER 2005 THAT MATCHES  ARE THESE THE SAME   FUEL INJECTORS
    • Jacob E freeman
      2018 cub cadet challenger 750 over heats no one knows why
      By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...