Quantcast
Jump to content


Steering Box

plumber

By plumber
in Joyner UTV SxS Forum

 Share

Recommended Posts

hfrick Enthusiast

hfrick

Posted
Posted

also curious as to what happened...steering rack updates with a new upper plate or changing out to the most current steering box is what I have seen....we have been putting power steering into the newer/updated boxes without trouble...that box does look kinda cool tho....Hardy

plumber Proficient

plumber

Posted
  • Author
Posted

What happened to the old one?

Hit a tree with the front tire blow off the top of the steering box. Dedub has done a subaru steering in he's it drives real nice but it rides even better he added a shock and left the stock one's in. Rides a lot better than mine.

Kinarfi Veteran

Kinarfi

Posted
Posted

what parts are damaged is the plate still straight did it just strip out the screws if it just stripped out the screws you can fix that with a helicoil kit I think a helicoil repair is stronger than the original

Guest Lenny

Guest Lenny

Posted
Posted

Re-drill ant tap a size larger. On the steering box above, 1.5:1 sounds awful fast for the trooper. If I'm right, that would be only about 135 degrees of steering wheel turn from stop to stop. Stock is about 2 turns and its still hard to turn. I had 3 turns from stop to stop on mine and it helped a lot. I don't think the power steering would be enough to push the 1.5:1 box.

plumber Proficient

plumber

Posted
  • Author
Posted

Re-drill ant tap a size larger. On the steering box above, 1.5:1 sounds awful fast for the trooper. If I'm right, that would be only about 135 degrees of steering wheel turn from stop to stop. Stock is about 2 turns and its still hard to turn. I had 3 turns from stop to stop on mine and it helped a lot. I don't think the power steering would be enough to push the 1.5:1 box.

Thanks Yes I can re tap But I was just looking to see whats out there. Lenny those cams are on the money with the new intake and fuel controller it runs real good the wife said my be to good since I hit the tree. I would like to see some else do the intake I thought it was better than the fuel controller. All 1100cc Chery motors have them on them except the trooper and that were I think is were you lose power at. On my air/fuel gauge it went from 11 when I start it to a 11.6 is what it will read when I start it now.. the part # is 472-1008013

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Skeeter22
      Polaris Ranger 1000XP steering issues.
      By Skeeter22
      I going from a Yama Rhino and bought a 2026 Ranger 1000XP. I was riding and lost all steering. The steering wheel just spins freely. I have one other video of this happing but has anyone else experienced this.
    • rdc
      Joyner 1100 oil pressure problem.
      By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • nrggaragebuilds
      2004 Joyner Dirt Devil Missing “Prick gear”
      By nrggaragebuilds
      2004 250DL DIRT DEVIL. Hey y’all, I already know this is a long shot. But I am looking for a the “prick gear” assembly that makes reverse work for my external reverse gearbox. OEM PN D250.08.103 and its assembly. I bought the kart as a basket case, but I saw that the reverse box was present so I was optimistic.  Upon starting working on the buggy I realized there was a block off plate in plate of there the normal gear would be. If my understanding is correct that means the transmission no longer has reverse gear. I figured it’s just a standard bevel gear and I could probably find a gear to make work, but I don’t want to spend the time making all the other housing parts to shim the gear perfectly. Has anyone spare parts, or figured out an aftermarket solution from McMaster? I already know it’ll be a challenge to get this box to be happy again, but figured I would ask  
    • HISUN Sector 750 EPS Failu
      Is Your HISUN Loud?
      By HISUN Sector 750 EPS Failu
      "Mrs. Smith" doesn't like how loud our Sector 750 is.  On a HISUN forum someone said the same thing about his 750.  I haven't given it much thought because I've been more focused on stuff that has broken.
      So, I used my decibel meter to check ours out.  4000 RPM, Low gear, under 20 MPH . . . . 97 decibels.  That's above most ordinances, even state boat noise limits.
      AI Overview Ninety-seven (97) decibels is considered very loud and dangerous to hearing with prolonged exposure, roughly equivalent to a newspaper press, a loud nightclub, or a snowmobile. At this level, damage can occur after just 30 minutes, necessitating hearing protection
    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...