Quantcast
Jump to content


Recommended Posts

Posted

The turn signal lights come on, but do not blink. I was told that it is similar to a car and that I would find a burnt out blinker under the dash. This is not the case with my Trooper. Where should I be looking next? If anyone has a picture of the area, that would sure help.

Posted

Chaco the connections at the blinkers make sure no water had gotten in there of course check the fuses behind drivers seat and under dash r/f side. I'm auto tech I always find with blinkers it's simple power ground bulb or corrosion just my thought

Posted

Chaco the connections at the blinkers make sure no water had gotten in there of course check the fuses behind drivers seat and under dash r/f side. I'm auto tech I always find with blinkers it's simple power ground bulb or corrosion just my thought

The connections at the light have been checked and found to be ok. With the turn signal turned to the left, both lights come on, but do not blink. With the turn signal turned to the right, both lights come on, but do not blink.

There is a black box behind the drivers seat, but it does not contain fuses. There is a sealed (white) box behind the passenger seat? When you refer to fuses under the dash r/f side, do you mean the passenger side? If so,

how do you get to it? There is a cover panel, however it does not have blind nuts on the inside and the nuts turn with the bolt.

Posted

My trooper is 09 behind the d/s i black metal black box the protects the ecm nxt to that there is a black plastic box which holds fuses even if the fuses are good u might wanna in bolt it and look at the back side for corrosion and burnt wires I think there are relays there to. On mine under the right side dash I have a black plastic box with fuses and relays I would check them as well. Does your hazard lights work normally

Posted

My trooper is 09 behind the d/s i black metal black box the protects the ecm nxt to that there is a black plastic box which holds fuses even if the fuses are good u might wanna in bolt it and look at the back side for corrosion and burnt wires I think there are relays there to. On mine under the right side dash I have a black plastic box with fuses and relays I would check them as well. Does your hazard lights work normally

Posted

My trooper is 09 behind the d/s i black metal black box the protects the ecm nxt to that there is a black plastic box which holds fuses even if the fuses are good u might wanna in bolt it and look at the back side for corrosion and burnt wires I think there are relays there to. On mine under the right side dash I have a black plastic box with fuses and relays I would check them as well. Does your hazard lights work normally

Looks like they made changes between the 08 and 09 models. I attached a couple of pictures for you to look at. I have to be out of town until Monday, so will have to put this on the back burner until then.

post-1654-0-92930500-1440078055_thumb.jpg

post-1654-0-29457300-1440078060_thumb.jpg

post-1654-0-02284400-1440078064_thumb.jpg

post-1654-0-09764500-1440078069_thumb.jpg

Posted

Ya that's a little different than mine have u looked at the terminal for the turn signals them self inside the light housing?

Found it. On the 2008 there is a mount on the battery box (next to the tranny tunnel) that the turn signal blinker is mounted to. When I pulled the part number, it looks like they used the same blinker as the 650 sand viper sand buggy.

Found the part on E-Bay for $10.00. Thank you for your help.

  • Like 1
Posted

Found it. On the 2008 there is a mount on the battery box (next to the tranny tunnel) that the turn signal blinker is mounted to. When I pulled the part number, it looks like they used the same blinker as the 650 sand viper sand buggy.

Found the part on E-Bay for $10.00. Thank you for your help.

Can you post a photo of the blinker and the part number? My Trooper has numerous modifications by the previous owner(s) so I always struggle to find things where they should be. Your fuse box behind the passenger seat is quite different from mine. Thanks.

Posted

Can you post a photo of the blinker and the part number? My Trooper has numerous modifications by the previous owner(s) so I always struggle to find things where they should be. Your fuse box behind the passenger seat is quite different from mine. Thanks.

I have attached a couple of pictures. The part is located down at the bottom of the battery box and hard to get a picture of, but did my best. I was able to include a picture of the part itself. There are two metal brackets welded to the side of the battery box. A rubber boot slips over the two brackets and the blinker fits securely into the rubber boot. The part came from Borossi-Joyner, part # JSG142 and the price was $9.99.

post-1654-0-27093700-1440810285_thumb.jpg

post-1654-0-09108200-1440810286_thumb.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • By MilSurpYinzer
      Anyone decent with electrical work that knows a good tutorial on how to make my running lights switch off all together but also turn back on when I need too? I'd assume that my lights are hard wired to the battery or the fuse panel.
      Vehicle is a Kawasaki Krx 1000
      I'm looking to ad IR driving lights for night vision and short of just putting black tape over the lights I feel this would be a more efficient option and it would be cooler. 
    • By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
×
×
  • Create New...