Quantcast
Jump to content


Recommended Posts

Posted

I have a 2009 Joyner Trooper II with a small problem.

The plastic blocks that plug into the relays behind the passengers seat for the Cooling fan ,Fuel pump and ECM were failing so I had to cut each of the 4 wires that terminate in the blocks and install female spade connectors to fix the problem. In doing this I believe I got a few wires crossed and I was hoping someone out there with a 2008 or 2009 Trooper II could take a picture of their three relays defining wich wires (color coded) go where on each of the 3 relays and forward that to my e-mail, [email protected]. I would greatly appreciate this.

Posted

KINARFI,

Thank you for replying to my post. It appears you have been around the Joyner based on your Album pics etc, great support for me hopefully. I see you have converted to FET's and I am more so a novice to amateur regarding the electrical, so please bear with me. I looked at your picture and do see wires that are common, but I was hoping I could either get pics of the relays for the ECM, Fuel Pump and Cooling Fan as they plug into those relays, allowing me to identify the correct wire based on color for each relay. I uploaded a few pics of my relays prior to removal and those are in the Photos tab under albums I believe, Joyner Trooper II relays.

Maybe we could talk or whatever you feel is best, but I would greatly appreciate the help if your willing and have the time. My Number is (928) 533-7010 and its Mark.

Posted

Kinarfi,

Thanks for responding and I did insert a few photos in the photo uploads tab under 2009 Joyner Electrical if you could take a look.

Thanks again,

Mark

Posted

Sorry, I don't recognize any thing in the photos, what's happening or not happening?

You can find those under, the Photos tab, then Albums and then 2009 Joyner Trooper II relays

Saw the photos, I just don't know what you're showing, so what's happening or not happening?

Jeff

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • By davebuckholts
      I just picked this UTV up off of Marketplace. It needs batteries. 
      I am installing a single 48v lithium battery. 
      The on board charger, a NOCO Genius GX 4820, has a lithium mode. 
      Has anyone here used this charger on new lithium batteries? I want to be certain of the compatibility before hooking the charger to this expensive battery. **
       
      **
      I got in touch with NOCO and they told me the charger is fine to use on a new LiFePo battery. 
      Nice charger. Many modes. New ones are running about $550. 

    • By Ed Michael
      My older LM 650 is blowing fuel into the air cleaner.  Any idea on what would cause this?  It is the Suzuki motor.  Not sure what model year it is.
      Thanks
      Subaru SxS.mp4
×
×
  • Create New...