I have the factory service manual available for the Buck 400. Just send me a message with your email and I'll get it to you. Although there is no charge for this, it would be great if you would visit my website where you could donate any amount to help do things like this with others who need it. Again, there is no charge for this manual, and no obligation to donate. But if you did, I would thank you for sure. Have fun on the trails. www.warriorsoffroad.com
I need help and idea's on the best options for a water tank/spray rig for a Mule Pro 6 passenger, used in the 3 passenger mode. This will be for support of prescribed burns, once called controlled burns, to clear under brush and slash after logging operations and wildfire prevention. Occasionally used to apply fertilizer, insecticide or herbicide on pasture. Also to provide supplemental water for crops, gardens/landscaping. Ideally it would be about 50 gal, with both a boom and hand held sprayer, and with a high volume pump. It would be nice to be able to suction pump to load the tank from surface water.
There are a lot of dealers, brands and units to choose from but I hope to hear from those that have some real world experience with this.
This looks to be a pretty common topic and I've had issues with mine overheating since I got it back around the end of 2019. Started running hot again, thermostat was not opening and they sent me a new one. Installed that, burped the system for air all to no avail. Next in line is the water pump to replace, they sent me a water pump and when I got the old one off it was not turning freely to say the least so I'm thinking that could have been my problem. My issue now is getting the slot in the water pump shaft to line up with the tab inside the engine of the machine. Any tricks to doing this? Thanks in advance
By Joe Breaux
Has anyone tried using an external electric water pump on these machines? I watched a video on youtube of one installed on a 1000 cc side by side that had chronic overheating issues in hot weather.. He claimed that after installing a Prius electric automotive pump from junk yard, inline in the inlet hose and bypassing fan temp switch, that the engine never overheated again. .. I am considering trying it on mine...................... Anybody else done this? .................. He did not say if he removed the mechanical pump or not.. would it pump thru that pump?