Quantcast
Jump to content


500cc Starte

Jojo64

By Jojo64
in UTV General Discussion

 Share

Recommended Posts

Jojo64 Newbie

Jojo64

Posted
Posted

Starter on Ranch Pony 500cc burnt and already ordered 2 from BMS that are wrong size which is a problem returning for refund. Had same problem returning with one way bearing on starter clutch. Just wondering if anyone would know of a compatible starter maybe artic cat or honda or other.
Thank you for any help.

  • Like 1
motojoe Contributor

motojoe

Posted
Posted

Just look on your original starter motor for a manufacture's name or a part number, then look up the part number on google and buy it from any of the vendors that come up BMS is usually way over priced.  I have a ranch pony and have really good luck with it but most of the parts from Chinese side by sides use the same parts. 

  • 4 weeks later...
Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted
On 10/12/2024 at 8:50 AM, Joe Breaux said:

Have yours rebuilt

Agree with this.

Rebuilt from local, reputable shop is good for local economy and you get better workmanship 99.99% of the time.

10 or more years ago, was needing a replacement alternator for car. After getting 3 or 4 from auto parts store that didn't last 1-2 months. Thankfully they had 6 month warranty. The last one I got, I took straight to the rebuild shop. Cost an additional $50 but lasted until I sold the car 2 years later.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • esmarkey
      2018 cub cadet 750 challenger clutch issues?
      By esmarkey
      Hi, I purchased a used Cub Cadet 750 Challenger that seemed like the belt was slipping so I put a new belt in.  It still acts like the belt is slipping but now I am thinking it is the clutch? 
      What is the best way to remedy this problem? 
      Can the clutch be rebuilt?
      Are there aftermarket clutches available? 
    • Garjess
      RTV 1140 Starter Relay
      By Garjess
      My rtv 1140 won't turn over.  I've jumped the neutral switch, and the brake switch, and checked the ignition switch. I'm not getting any power to the trigger wire on the starter solenoid.  It starts fine with the key on and putting power to the trigger wire on the solonoid.
      Does a 2010 RTV 1140 cpx have a starter relay? 
      Does anyone have a wiring diagram?
    • AaronD1982
      Massimo 400S Buck UTV Starter solenoid replacement
      By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
    • Butch
      2023 Hisun Axis 700 fuel problem
      By Butch
      I have a AXIS 700 EFI Fuel pump pressure stays at 40 psi and when return line is blocked the pressure goes to 60 psi. and wll only run with return line closed. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...