2013 Hisun 800 Please Help Wiring

[Marie]

Hello, we recently got a 2013 Hisun 800 as a little project for my husband and I to work on. Turns out the guys before us loved the mud anyway. We have replaced the stator and now going to do the Rectifier but here is the hold up as seen in the picture. There are tons of wires going to the battery. I cant seem to find anything that shows what wires should, or shouldn't be attached to the battery or where these 2 plugs go. if someone would please take some pics or share knowledge to where they go I would appreciate it greatly.

[Marie]

1 minute ago, Marie said:

Hello, we recently got a 2013 Hisun 800 as a little project for my husband and I to work on. Turns out the guys before us loved the mud anyway. We have replaced the stator and now going to do the Rectifier but here is the hold up as seen in the picture. There are tons of wires going to the battery. I cant seem to find anything that shows what wires should, or shouldn't be attached to the battery or where these 2 plugs go. if someone would please take some pics or share knowledge to where they go I would appreciate it greatly.

 

[hdtran]

Have you looked in the "files" section (go to the top of the forums, click download button)? People have kindly uploaded wiring diagrams for other Hisun models, and what looks like a Hisun 800 service manual.

Disconnected plugs *MAY* be wiring for optional accessories, such as light bars, etc.

Best of luck!

[Flavorless]

The “L” shaped connector in your hand is for the solenoid on your axle.  I have been working the electrical bigs out of the same machine.  I replaced the crank sensor and got the fuel pump to run, but now I’m waiting on a new voltage regulator.  There is an 8 pin connector that will probably need to be replaced on your unit too.  These things were not meant to go in water or mud as designed.  I would also test the four pin relays in the battery box as those were also shot on my well neglected ran too hard 800.