Quantcast
Jump to content


Must have upgrades/spares?

MilSurpYinzer
 Share

Recommended Posts

MilSurpYinzer Rookie

MilSurpYinzer

Posted
Posted

Hey all, I was just wondering what you guys consider a necessary upgrade or spare part to have or mod onto your machine.

I'm going for a kind of shtf survival rig that's not going to be SUPER heavy and I'm looking at getting:

A spare belt (I keep seeing this mentioned everywhere I look so it must be important)

A spare tire and mount( So would I need a jack like one from an old jeep or something else?)

Tire chains for the winter

And maybe a cargo bed upgrade so things don't slide out.

Bumpers because duh.

I already installed high output lights and have a windshield, roof, back window, and winch. And I outfitted a Molle panel for the back of my passenger seat with extra supplies like food, first aid, and spare mags.

Any advise on increasing durability, longevity, and having something on hand because it's absolutely necessary would be a plus.

Thanks so much!

  • Like 1
MilSurpYinzer Rookie

MilSurpYinzer

Posted
  • Author
Posted

These little guys on the edges of the bed. Sorry if the photo isn't super clear...oh and it's kinda dirty 😅.

I'm picking up what you're saying though. I think if I cover those with masking tape and spray it down with bed liner it should work. I did some digging on it and so far it seems like a good solution for helping haul stuff.

Now when it comes to carrying tools for trail work I'm seeing that most of the parts I need to access are typically removed by sockets and maybe a few other small odds and ends. Is that a good bet to add to my kit?

IMG_20260428_115305449_AE.jpg

CSM_Retired Enthusiast

CSM_Retired

Posted
Posted

Okay I see what you mean. In your case I would tape them off before spraying so you could still have access. Another great option is to go to tractor supply and buy one 6'x4' horse mat. I believe there are two thicknesses. Use cardboard to complete a template and cut it to fit on the floor of your bed. It will significantly protect the bed. It may be a better option in your case. A good impact socket set with breaker bars and a hijack type jack is always a good thing to have. 

MilSurpYinzer Rookie

MilSurpYinzer

Posted
  • Author
Posted

Horse mats!? I can't believe I didn't think of that! That an awesome solution.😁

Would a jack like the one from old jeep work for repairs or is it to weak to lift a Kawasaki Krx?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • HISUN Sector 750 EPS Failu
      Is Your HISUN Loud?
      By HISUN Sector 750 EPS Failu
      "Mrs. Smith" doesn't like how loud our Sector 750 is.  On a HISUN forum someone said the same thing about his 750.  I haven't given it much thought because I've been more focused on stuff that has broken.
      So, I used my decibel meter to check ours out.  4000 RPM, Low gear, under 20 MPH . . . . 97 decibels.  That's above most ordinances, even state boat noise limits.
      AI Overview Ninety-seven (97) decibels is considered very loud and dangerous to hearing with prolonged exposure, roughly equivalent to a newspaper press, a loud nightclub, or a snowmobile. At this level, damage can occur after just 30 minutes, necessitating hearing protection
    • KMP
      2015 Arctic Cat Wildcat Sport 700 XT (tips for maintenance / just purchase)
      By KMP
      We just bought our 1st side-by-side and wanted to get tips on maintenance items we should address immediately for our 2015 Arctic Cat Wildcat Sport 700 XT.  We are truly beginners and welcome any and all suggestions.  Thank you, we appreciate your help!
    • schreib69
      2008, 750 Teryx auction machine-- concerns!
      By schreib69
      I just bought an older (2008) Teryx 750 and am having some concerns.  Hoping of course, that most are not too big. . . but more knowledgeable folks like yourselves will surely have some ideas.  Thanks in advance.
      -- about 2700 hrs, camo version
      -- Starting:  after not running much at the auction site, I tried it and it was tough to start but half of this was likely I did not quite know the tricks for how long to keep the choke on. However, once it started it was kind of hard to keep running until it warmed up(once warmed it starts perfectly every time with no choke).  Now, back to running after the first ignition:  I had to hold the RPM's up a bit to keep it running and when doing so it sounded as if a little gnome was inside the engine pounding on something at random intervals.  Wondering if this could be detonation-- "knocking"?  After warming, it disappeared completely.  Maybe just need higher octane gas??
      -- After starting and running a bit there was a pretty terrible smell, most "like" burning rubber or an electrical fire.  No fire or resolution of this.  Eventually this TOO went mostly away, but still basically present.  Could it be adjustment needed for the main belt variable speed tranny?
      -- When I move from neutral into either Lo or HIGH range forward gears, I get gear clashing.  I did NOT put foot on brake and read in manual(just NOW) that you are supposed to do so.  (I have NOT gotten back out to check and see if this matters. )  OR, could it be part of the drive system is mashed up??!  Geez, hope not.
      -- There is a big open hole allowing direct sight into the belt transmission on the back right side.  This can't be normal, it must require some plastic cover.  Right?  Any rodent could get right into the transmission!
      -- THere appears to be no muffler or spark arrestor unit.  This "could " be the cause of some of the smell. . . ??  but that should not smell like burning rubber or electrical smell. . .
       
      SO.  That is all.  
      I sure would appreciate any insight on this issues and finally(!). . . if I was to take this into a local dealer what would you say are the top three issues I should have them address first?
       
      thanks!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...