-
Similar Topics
-
By Rmillerdesigns
Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
-
By Timbo
I never see videos of hear of people taking these things to the big trails. Do you ? I just got one and want to.
-
-
By Guest
Good afternoon,
I have a 2022 Bobcat 34XL. Over time, I have to press harder and harder on the brake pedal before the ignition will fire. Now I have to practically stand on it with all my weight to get it to start. Does anyone know if there is a spring or something that might need replacing, or have had this issue before? I don't have any schematics of the brake sensor/assembly.
TIA
-
By redneckred
After replacing a master cylinder on this machine, I was bleeding the brakes and discovered the brake line that connects to the rubber hose coming from the master cylinder under the seat and turns into a small tube going to the back brakes appears to be leaking at the joint. I checked the connections and found them to be tight. I was looking at getting a replacement part, but can only find parts for the front brake line hose to the calipers and not anything from the master cylinder back to the rear hoses. Does anyone know where to find this part or what the part number actually is? Not sure if I can fix the leak and I am not a brake hose rebuild guy, never had much luck without them leaking.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.