-
Similar Topics
-
By moonrover
Mine is overheated/burned/melt at connection with its wire connector, parts are ordered to replace both them. This seems to be a common issue, and some of you already replaced it. I right now just connect the wires, so the fan runs all the time whenever the initiation is on, but it's better let fan runs as needed with a working temperature sensor/switch.
Question: Does some coolant come out by removing the switch/sensor from radiator? Or, is the threaded hole all the way inside radiator? If the answer is yes, I want to drain or extract some coolant to make its level below the sensor before replacing it, so I don't make a mess with coolant spilled out
Thank you.
-
By TBoss 560 2023
Got a new 2023 TBoss 560 with 40 miles on it now. Noticed after about and hour of plowing snow coolant started hissing out the overflow tube. Initially made a pop or blow kind of noise and then saw some steam and smelt coolant. Coolent level is in the middle between low and high (running or not). Coolant under radiator cap is full when cold, appears nice and green. Checked oil doesn’t look milky. The temp ranges from 160-180 F running for 15-20. Noticed the other day there was some more coolant that blew out the overflow tube. I called the dealer and they said the system could be purging air. Dealer is 2+ hours away so wanting to get more thoughts before considering to bring it in. Also noticing hot/burning rubber smell but I think this is from the belt breaking in? Also notice the coolant smell from the exhaust when in higher RPMs. No white smoke from the exhaust. Also another possible issue. I notice that there’s a little bounce when on pavement. You can also hear the CVT kind of make noise with this bounce in tandem. Is this normal?
-
By FloridaMan
View File MSU 500-700 Wiring Diagram
THis is the wiring diagram for MSU500 through MSU700. It looks to be right and I have verified most of it by hand.
Submitter FloridaMan Submitted 02/11/2024 Category Massimo
-
By NicholasNWM09
Hello Everyone,
COOL NEW Product Alert!
A company called NEW Wire Marine or NEW Wire has Badass custom panels for UTV, Buggy/Hunting trucks. From Fully wired switch panels with laser etched rockers with backlights in 5 different colors, to just parts like voltmeters, phone, USB and 12 v chargers. Rockers can be printed, or custom laser etched rockers and they even have sleek labeled pushbuttons. They are a first-class company with a great knowledgeable staff and outstanding customer service. Switches are based on 12v or 24v circuits and they also have marine grade wire and connectors, which is perfect for waterproofing your system!
Go check them out!
Check out the websites : https://newwiremarine.com/ and https://rockerswitchpros.com
-
By NicholasNWM09
Hello Everyone, COOL NEW Product Alert! A company called NEW Wire Marine or NEW Wire has Badass custom panels for UTV, Buggy/Hunting trucks. From Fully wired switch panels with laser etched rockers with backlights in 5 different colors, to just parts like voltmeters, phone, USB and 12 v chargers. Rockers can be printed, or custom laser etched rockers and they even have sleek labeled pushbuttons. They are a first-class company with a great knowledgeable staff and outstanding customer service. Switches are based on 12v or 24v circuits and they also have marine grade wire and connectors, which is perfect for waterproofing your system! Go check them out!!!Honda - xxxx - UTV Pioneer - xx'.pdf
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.