Quantcast
Jump to content


Recommended Posts

Posted

I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next

  • 2 months later...
Posted
On 9/27/2021 at 7:50 PM, Jacob E freeman said:

I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next

I’m having the same issue with a 2017 550.  It’s in the shop now awaiting a new head gasket (that’s somewhere in neverland) according to shipping info.  Also a new water pump is to be installed.  Mechanics have repeatedly bled the system but after a few hours it overheats.   It has something to do with blow back.  Once it begins to overheat, the radiator and overfill jug is filled to the brim.   One mechanic opened the radiator cap and was drenched in the pressurized fluid!   The saga will continue if I ever see the head gasket. 

  • 8 months later...
  • 11 months later...
Posted

I have a 2018 750 eps that overheats just like the guys in previous post..I was wondering what they did to fix it...I took to shop that I bought it from five or six times and they said it's fixed.. It's not . Anyone have an answer for me.. Thanks...

  • 4 months later...
Posted

I had the same problem. Shaved the head, new head gasket, new water pump. Nothing worked. I ended up just buying a new drop in motor. But as I thought about it, I never checked to see if the water pump was actually turning. I am guessing that the chain that drives the oil pump and water pump spun off. If I ever find the time I am going to disassemble the old motor and find out. 2018 750 challenger crew. 

  • 11 months later...
Posted
On 11/19/2023 at 8:24 AM, Imtoorelaxed said:

I had the same problem. Shaved the head, new head gasket, new water pump. Nothing worked. I ended up just buying a new drop in motor. But as I thought about it, I never checked to see if the water pump was actually turning. I am guessing that the chain that drives the oil pump and water pump spun off. If I ever find the time I am going to disassemble the old motor and find out. 2018 750 challenger crew. 

What drop-in motor did you use?  Have you been happy with it? 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Topics

    • By Mountainman
      Radiator fan on 2018 textron havoc won’t come on
    • By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • By Debbie Hogan
      I realize this part is discontinued but im trying to find this exhaust pipe fir my dads 550.  His brother who has since passed bought this mule for my dad who is now 90 and he is trying to fix everything on it.  I'm willing to take a used one.  A new one would be great if someone still had in stock.  I'll take anything as long as it is in workable condition.   If anyone has any ideas for me im open to hearing them.  Thank you so much.
       
      Debbie fm  Texas
    • By HighSon
      Haven't posted in a while since solving the excessive cabin noise issue, so I thought I would share a few upgrades to my Sector... Realize that this is driven daily on the street, so some of the mods are to make it more streetworthy.

      Locking gas door.

      Rear view mirror.

      Modified windshield for better airflow in cabin.

      Lowered and modified headrest bar for improved rear view.  Tailgate protector.

      Folding armrests.

      Overhead utility rack.  Keeps the interior cooler and dryer, too!

      Folding rear seats.

      Dust cover and seat protector.
      If anyone wants links to the rear view mirror, seats, or arrests, let me know and I will post.  But know that everything requires some level of fabrication.  The utility rack was all custom built.  Cheers!
×
×
  • Create New...