Quantcast
Jump to content

2015 Massimo MSU 500 No power to start


CDT540

Recommended Posts

I recently purchased 2015 MSU 500 that had 800 miles and about 170 hours.  I have replaced the wet clutch, outer clutch and belt.  All the parts were from either Parts Boss or one of the other Hisun parts suppliers online.  It still has absolutely no power when trying to start moving.  If the ground is not perfectly level or down hill no way you can get moving in "H".  "L" and "R" is not much better.  As a utility vehicle it is useless.  No way you could ever pull anything since it can barely get itself moving.  Is this common?  I don't see how because it is barley functionable.  Any suggestions?  Does the quality of the belt vary from one belt maker to the other?  It appears that something is slipping, the RPMs climb but you don't go anywhere.  Trying to decide whether to just cut my losses and write off the $ I paid for it or give it one more try.  Any help is much appreciated.

 

Chris

Link to comment
Share on other sites

  • Alex changed the title to 2015 Massimo MSU 500 No power to start

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Steve B
      My "R" light on the dash will not go out when I take the UTV out of reverse and put it into any other gear. Is this just the light switch issue or will this effect engine performance in the other gears?
    • By Travis
      View File Kawasaki Mule 550,520,500 Complete service manual
      This is a complete service manual for the Kawasaki Mule 500,520 and 550 models.
      Topics  covered include Brakes, Steering, Electrical system, suspension and fuel system. As well as engine repair procedures and Transmission/Final Drive procedures.
       
      ********************************************************************************************************************************************************************************************
      If you need more information about the engine this manual linked below is chock full of information.
      Thanks goes to @cliffyk for getting these files all  into one PDF format for uploading.
      Submitter Travis Submitted 04/18/2021 Category Kawasaki  
    • By Smittay
      (posted a similar question to the Hisun folks) Looked at a lot of UTVs lately. Couple Questions about Massimo. Some people say they are just cheap with no customer service. Other people seem to have no problems with them.
      Any opinions on Massimo durability?
      Heard parts might hard to get. Is that true?
      What models are the best?
      If you had one and didn't like it what do you recommend? 
    • By ETHIEL
      Spark plug keeps fouling. after 10-15 minutes of running any ideas what to look fore 
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
×
×
  • Create New...