Search the Community

Good afternoon. I have a 2010 hisun HS500utv. The vehicle had an oil leak in the rear drive shaft in the connection to the engine. After disassembly the problem was not the retainer but a small star-shaped seal that was tightned with a nut between the washer and the flange. I don't know if the seal is part of the washer (if it's glued) because I can't find the reference for this seal in any catalogue. If anyone can help me I'll be forever grateful. Attached photos. Best Regards, João Ferreira.

I purchased a 2015 Hisun HS500 UTV used, and the only thing wrong with it is the fuel gauge does not work. When the fuel pump is in the tank, the gauge always reads empty. When I remove the fuel pump from the tank and manually move the float, the gauge works as it should. When the fuel pump is in the tank, it sounds like the float is hitting something in the tank. I checked the tank and there seems to be no obstructions in the tank. I figured the float arm was too long so I cut 1" off the length of the rod and reconfigured the float. I put it back in and the same thing happens: the gauge shows "empty". I have made sure the fuel pump is in the proper direction with the inlets pointing toward the driver side and the electrical connection is pointing toward the front of the vehicle. We don't have a Hisun dealer locally and all the dealers away from here, including the plant in Texas, have no suggestions other than what I've tried. Please help.

View File Hisun HS 500-700 Service Manual Here is a copy of the factory service manual for the Hisun HS500-700 Submitter strike250 Submitted 01/04/2021 Category Hisun