Quantcast
Jump to content


Rear gear case cracked...any ideas....how, and what to do?

Steve Vanvelzen

By Steve Vanvelzen
in Massimo UTV SxS Forum

 Share

Recommended Posts

Steve Vanvelzen Apprentice

Steve Vanvelzen

Posted
Posted

I have a 2021 Massimo T-Boss 550 which now has a crack in the rear gearcase. A few weeks ago during my usual fluid checks I noticed that the gear oil was very low and there was an oil film on the outside of the case on the side where the plug is. I topped up and cleaned it up. I assumed the the bolt was not sealing properly so I ran it as usual and same thing again and again. So then I was thinking that maybe I need a new washer or something. I cleaned the outside of the casing and was about to top up the oil when low and behold.......I noticed a crack across the top right side. OMG, this thing is only a year old. Any ideas out there on how this would happen and most importantly....how can I fix it?

Any advice would be appreciated because as we all know on this forum it is hard to get shops to work on these wonderful machines. And if I need parts, wish me the best of luck.

  • Steve Vanvelzen changed the title to Rear gear case cracked...any ideas....how, and what to do?
TapBoss Collaborator

TapBoss

Posted
Posted

The way they are set up I think you can rule out being over-filled.  Sounds like it has still been running so something cracking it from the inside doesn't sound plausible either.  My guess is a weak spot in the case when manufactured.  Other than a replacement, I'd probably opt for Industrial Strength JB Weld (depending on how big the crack is).  I've seen guys fix automotive tranny's with that stuff.

Steve Vanvelzen Apprentice

Steve Vanvelzen

Posted
  • Author
Posted

Thank you for the response TapBoss. Funny that you mentioned JB Weld, I watched a dozen Youtube videos on it this weekend and went out to buy some yesterday. The crack is on the top so hopefully this patch will keep me going for quite awhile. It kinda looks like there was a crack in the manufacturing die; not sure if this thing is forged or cast but it is a long crack and parts of it protrude outward

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • TapBoss
      TBoss Enclosure
      By TapBoss
      So I’d been shopping for an enclosure for my ‘21 TBoss pretty much since I bought it. Then they came out with half doors and that’s the only one that I could find. Then the other day I ran across one on Amazon for half the price of anything else I’d seen. The link is below and I’m pretty impressed by how well it fits. There is one Velcro strap on the top of the door that doesn’t line up well with the roll cage, but I’ll work around it. 
      https://a.co/d/09ACQ191
       
    • rdc
      Joyner 1100 oil pressure problem.
      By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • Rusmis91
      Considering buying a 2021 1500 coleman
      By Rusmis91
      I’ve never been around Coleman Utv machines. Do they have a good reputation, durable dependability. Could you compare them to yamaha rhinos or Polaris ranger
       
      thanks in advance
    • nrggaragebuilds
      2004 Joyner Dirt Devil Missing “Prick gear”
      By nrggaragebuilds
      2004 250DL DIRT DEVIL. Hey y’all, I already know this is a long shot. But I am looking for a the “prick gear” assembly that makes reverse work for my external reverse gearbox. OEM PN D250.08.103 and its assembly. I bought the kart as a basket case, but I saw that the reverse box was present so I was optimistic.  Upon starting working on the buggy I realized there was a block off plate in plate of there the normal gear would be. If my understanding is correct that means the transmission no longer has reverse gear. I figured it’s just a standard bevel gear and I could probably find a gear to make work, but I don’t want to spend the time making all the other housing parts to shim the gear perfectly. Has anyone spare parts, or figured out an aftermarket solution from McMaster? I already know it’ll be a challenge to get this box to be happy again, but figured I would ask  
    • Adrian Domingues
      2023 Massimo T-Boss 550
      By Adrian Domingues
      I have 31 miles on my new T-Boss 550. In order to start I put in nentural and the emerage brake on and push down on brake paddle, then trun ket and get nothing, with key still on I shift to reverase and the back to netural and it starts.  Anyone know what is happening.
      Thanks for your help

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...