Quantcast
Jump to content

New member Coleman 400


Charles Hines

Recommended Posts

I bought a 2021 Coleman 400 UTV from Tractor supply mainly because of the $2000 off black Friday sale ($6999). I wanted something to do some light hauling around the boat shop and figured this would be a better choice than a golf cart. Initial review is that for the money,it's got to be the best deal going. Fully equipped right out of the box with a lot of nice features. First off,everything worked,that's a good thing. First thing I noticed is that this thing is LOUD,so loud that I use foam ear plugs to run it. The rear axle is locked,like most 4 wheelers,so the tires scrub on tight turns and will tear up the lawn. I found some loose bolts and did a general inspection of everything and tightened up the loose ones as I found them. It's cold here in SE Michigan and I want to do some recreational use during the winter. I bought a 3 Star door and rear window soft enclosure and installed it. Top quality materials and fit great. I added some foam to close off all the gaps and it really does the job. Next I added a Ice Crusher heater kit that uses the coolant to provide heat in the cab. Quality parts and the kit was pretty much complete,I also added a coolant shutoff valve so I can direct all the coolant through the heater instead of the radiator,or blend it as I wish. The heater has a 3 speed fan and 2 directional outlets for this model and with the enclosure will warm it up to shirt sleeve temps at speed with the outside temps in the low 30's. I also added a Kolpin Stealth 2 auxiliary silencer, the exhaust note is definitely quieter and less raspy, but this rig is still noisy enough at speed that you need ear muffs or plugs. I changed out the headlight bulbs to LED's which are a big improvement from the halogens. I figured out a trailer hitch adapter for the oddball thing Colman provides. Now it's just run it in and break it in. For a 400, it is actually quicker and faster than I expected,the specs say 38, but it's closer to 50. Brakes are powerful and smooth. The solid rear axle makes this thing pretty capable,but you also have the push button 4 wheel drive and a push button front diff locker if you need it. All in, it's set up just the way I wanted it for under $8000.

  • Like 1
Link to comment
Share on other sites

Welcome.

If you have any questions there's plenty of info in the coleman and hisun forums (it's a rebranded hisun, but most of the 400 posts are in the coleman section) there's a couple posts in each about things to help quiet these machines down.

People have had good luck with adding various sound deadening materials under the front/sides of the seat and under the bed.

I would love to see a post about the heater setup with some installed pics. I've seen them listed but you're the first person I've heard of actually installing one on a 400.

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Steve B
      My "R" light on the dash will not go out when I take the UTV out of reverse and put it into any other gear. Is this just the light switch issue or will this effect engine performance in the other gears?
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By Ermd ttk
      Hello friends,
      I got my ODES Ravager UTV yesterday and after a couple of hours of driving when I go downhill I heard a strange loud noise a couple of times, like a gear skipping or maybe something from the differential.
      It doesn't always happen and when it does it is heard for a few seconds and then it goes away and everything works normally, I'm worried if there could be some major malfunction or what could be the problem if someone can help me?
      Thanks a lot.
       
    • By ETHIEL
      Spark plug keeps fouling. after 10-15 minutes of running any ideas what to look fore 
    • By AlaskaTrail
      Hi All,
      New to UTVs and recently accuired a ut400 from our local Alaska Commercial Co. and had a questions regarding the transmission fluid. I have had a squeeling noise, sounds like a teapot, that recently started after being driven for a few minutes. The manual says to change the fluid at 500 miles, so I was thinking maybe its just time for this to be changed. Other then that I cannot find any information regarding the type used. While reading through these forums, I seen someone put that the transmission is lubricated with the engine oil. Is this true? If not what should I be using and where can I find the information to change it out? Any input on this would be greatly appretiated!
      Thanks in advance
×
×
  • Create New...