Quantcast
Jump to content

Engine for a Hisun Strike 250

Schaffer

By Schaffer
in Hisun UTV SxS Forum

 Share

Recommended Posts

Schaffer Newbie

Schaffer

Posted
  • Author
Posted

I have looked high and low to try and find a replacement engine for my sons Hisun Strike 250. I have had no luck has anyone else experienced the same problem? Is there anywhere to find one? It's only 2 years old it's almost unbelievable that it's disposable? 

Link to comment
Share on other sites
  • Alex changed the title to Engine for a Hisun Strike 250
Cody Brown Newbie

Cody Brown

Posted
Posted

I've looked as well.  i got a 2014 model on facebook marketplace that has had quite a few problems.  I knew it had problems when I bought it and I got it at a really good price.  I considered just replacing the engine also, but ended up taking a crack at rebuilding the top end myself.  My first time doing that on anything at all, and it was a bit hairy for a beginner, but I managed to get it all back together.  Seems to be running well.  With it only being 2 years old, have you tried reaching out to the manufacturer for help?  I've learned a lot about this thing in the last 2 months, but still a long way to go.

Link to comment
Share on other sites
Guest

Guest

Posted
Posted

I have the same problem: 

I have a 2017 Bennche Spire 250 (same engine as Hisun Strike 250) and I have searched for going on over a year now for a replacement engine with zero luck. Can anybody HELP?

Link to comment
Share on other sites
Racenut Newbie

Racenut

Posted
Posted
On 6/2/2023 at 5:06 PM, Cody Brown said:

I've looked as well.  i got a 2014 model on facebook marketplace that has had quite a few problems.  I knew it had problems when I bought it and I got it at a really good price.  I considered just replacing the engine also, but ended up taking a crack at rebuilding the top end myself.  My first time doing that on anything at all, and it was a bit hairy for a beginner, but I managed to get it all back together.  Seems to be running well.  With it only being 2 years old, have you tried reaching out to the manufacturer for help?  I've learned a lot about this thing in the last 2 months, but still a long way to go.

Cody,  were you able to do the top end with the motor in the buggy?  Ours is burning oil bad and hoping a new cylinder, piston and rings will fix it up.  Did you need any special tools?  It's at my mother in laws house so would be nice to know if I need anything special.

What top end kit did you get? I was looking at this one https://tinyurl.com/2ku3bzfh

Link to comment
Share on other sites
  • 2 weeks later...
Cody Brown Newbie

Cody Brown

Posted
Posted
On 6/5/2023 at 11:35 PM, Racenut said:

Cody,  were you able to do the top end with the motor in the buggy?  Ours is burning oil bad and hoping a new cylinder, piston and rings will fix it up.  Did you need any special tools?  It's at my mother in laws house so would be nice to know if I need anything special.

What top end kit did you get? I was looking at this one https://tinyurl.com/2ku3bzfh

Sorry I just saw this message.  I think I might have been able to do it in the machine but I opted to pull it so I could get a better look at everything.  Being my first rebuild I didn’t want to have to fight it.  In retrospect, I also wish I had went ahead and rebuilt the clutch and replaced the belt while I had it out too because the clutch seems weak and I don’t think you can get the clutch cover off without pulling the engine out.  Haven’t looked too closely at that yet though.  Just be sure to label your wiring harnesses or take lots of pictures so you remember how everything goes back together. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • didgeridoo
      Hisun Sector e1 Battery replacement: any tips?
      By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • Randyh79
      Hisun Sector 750 – dash light adjustment
      By Randyh79
      Is there a way to adjust the brightness of the dash light on aHisun 750 sector?
    • Mark T
      Can I put a larger engine in my 400 colman UTV ?
      By Mark T
      MY 400 is gutless. I would like to know if I can upgrade to a larger engine ?
    • todd93
      Hisun Sector 550C total electrical failure.
      By todd93
      Hi, all! I. I'm new to the board, hoping someone could help me out! I have a 2020 Hisun Sector 550C that I bought new in 2021. Today, I took some stuff next door to my parents. When I went to leave, I turned on the key, heard the solenoid click, but no lights, no guage activity, no fuel pump, and no starter. 
       
      The battery is good, I checked all the fuses, they are good. Not sure if the relays are good, or even what to look for there. Is it possible that it's maybe a wire? 
      I'm really stumped on this one! Any help would be deeply appreciated! Attached is a pic of the fuse box layout. 
       
      Thanks! 
      Todd 
    • donwan
      2017 Hisun Strike 900 Service Manual
      By donwan
      View File 2017 Hisun Strike 900 Service Manual
      Here's the service manual for the 2017 hisun strike 900.
      Submitter donwan Submitted 05/29/2024 Category Hisun  

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...