Quantcast
Jump to content


2019 CF Moto uforce 1000 02 sensor

Jay Joseph

By Jay Joseph
in CFMOTO UTV SxS Forum

 Share

Recommended Posts

Jay Joseph Newbie

Jay Joseph

Posted
Posted

I have a 2019 CF Moto uforce 1000 my yellow engine light is on and I bought a diagnostics tool online I plugged it into my machine and it came back with error code O2 sensors so I replaced them both plug the diagnostic tool back in the yellow light was off. I let it sit for two days and now the yellow lights back on and when I plug the diagnostic tool back in it says O2 sensor low-voltage bank two sensor one. Does anyone  know what this means? Replace both sensors with new ones. I thought I’d save some money and not bring it to a dealer, but looks like I might have to. I took my machine up to camp and it ran like crap almost like it was getting too much gas. Half throttle it was all right but climbing hills, and going over certain terrain it would just die out

  • Alex changed the title to 2019 CF Moto uforce 1000 02 sensor
  • 1 month later...
  • 1 year later...
MBWatson Newbie

MBWatson

Posted
Posted

Found your thread regarding the CFMoto O2 sensor.  Mine threw a PO151 code "Low Voltage Bank 2, sensor 1"  I can only find one of the sensors, center rear of machine accessible from top.  Where do I find the other one?   Did you ever get your issue resolved?  Thanks, Mike

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • Hoppy one
      Bennche 500, replaced stator no fire
      By Hoppy one
      I replaced the stator on our Bennche 500 because it was not charging. It ran as long as you kept the battery charged. I replaced the stator now it’s not firing. The only problem I found was a wire in the new stator for the crank position sensor was in the wrong place in the plug. I switched it around but still no fire. Putting a meter on those wires and cranking the motor showed no voltage from the crank position sensor. Something I did or a bad “new “ part? Thanks for any ideas.
    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • Fmaxiron
      Honda Pioneer 1000-6 back windshield or screen.
      By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • Jamie 67
      Why is there 2 different length keys for my tboss 1000
      By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • brewski
      installing light bar on kubota rtv 1100 x
      By brewski
      I just purchased a 2025 kubota rtv 1100 x cab esd esnting to install light bars on the roof it appears to be prewired for lights how do lights mount and what kind of switches do i need

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...