Quantcast
Jump to content


Radiator

Detbohica

By Detbohica
in Joyner UTV SxS Forum

 Share

Recommended Posts

Detbohica Collaborator

Detbohica

Posted
Posted

All I need to replace my radiator, I have been quoted 500 to make one here in Mexicali, which will be a good raidiator im sure of that, but has anyone found something else besides buying just the replacement on line. I saw Lenny took something from an Acura, but he had to make some mods. Is there anything else that is more durable that fits?

  • 2 weeks later...
Detbohica Collaborator

Detbohica

Posted
  • Author
Posted

Well tell us what you did

Ended up buying a stock radiator. I was at my local race prep shop for the Baja and what the locals in Mexicali were quoting was close to 500 for a custom radiator. So I went with the stock radiator and a fan from Kar Tech that pulls 1700 cfm. I trust the guys that prep the race cars for us, so that is the path I took.

Still in need of the sensor though. Have an email into JMC. I've tried contacting silver bullet but not happy with there poor customer service.

  • 2 weeks later...
Detbohica Collaborator

Detbohica

Posted
  • Author
Posted

Back in the hunt for the radiator have ordered twice and then got refunded since the supplier didn't have. Anyone else know where to look.

Still trying with Silverbullet, JMC and No limits 4x4.

  • 2 weeks later...
Detbohica Collaborator

Detbohica

Posted
  • Author
Posted

Last gas for anyone that has found or can find the stock radiator, otherwise going custom and looking to mount below the spare tire carrier. Should help with the damn heat here in Mexicali, already picked up a better fan.

  • 3 weeks later...
Detbohica Collaborator

Detbohica

Posted
  • Author
Posted

Update, bought larger radiator 19" height x 22" length 1750 cfm fan and will relocate in the storage area below the spare tire carrier. Once installed hopefully in a couple weeks will post pictures of what I did.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Kierobi
      MSU 500 Fuel Pump Ground
      By Kierobi
      Have a MSU 500 that we got from my wife's uncle a while back. We've had it running and hauling around the property but it stopped a few months ago after what I thought was running out of gas and I'm just getting to looking into it. 
      Had fuel to the injector but nothing coming out the injector so swapped with new injector and installed inline filter in the supply hose from fuel pump. Tried again and still nothing but noticed this time that I can't hear the fuel pump priming. 
      Pulled off the electrical connection and I'm getting 12V to the fuel pump but it won't run. Put it on a test bench and got it to run so put test lamp between +ve and -ve terminals on the connector and nothing. Checked against the passenger seat securing post and get a light. 
      Tried chasing the wire back and think that the ground is through the ECU but not 100% sure. Can someone confirm for me? And if it is through the ECU, is the ECU just grounded against the frame or is it wired through to the battery?
      Thanks in advance and hope this all make sense!
    • Hunterman22
      2021 Hisun 500 Axis. Reading Codes??
      By Hunterman22
      Can anyone please tell me or send a link as to how & where to hook up a code reader to my 2021 Hisun 500 Axis.  I have a 6 pin to a 18 pin  adaptor and the blue cord VAG KKL adaptor .Just not sure where or what to hook up to. Can I use your typical vehicle code reader or do I need to download something on a laptop or PC???
       
    • AaronD1982
      Massimo 400S Buck UTV Starter solenoid replacement
      By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
    • Eman85
      Fuel injector replacement Massimo 500
      By Eman85
      Pulled fuel injector to see if I could clean it or if it's stuck open. Had a slide on clip that was really tough to get off. Don't see how the clip is supposed to lock into the plastic part that the injector slides into. Any videos or pics of injector replacement? 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...