Quantcast
Jump to content

Opinion on mounts

charlie

By charlie
in Joyner UTV SxS Forum

 Share

Recommended Posts

charlie Experienced

charlie

Posted
Posted

Hey guys looking for some input on this. Hopefully getting new shocks tommorow bolt size is 1/2" on the t2 I know the bolt is close to 5/8" or almost 16mm so what I was thinking is at the end of my new shocks taking the ball out that the bolt pass's threw and drilling it to the size of the t2 bolt so when all assembled there will be little to no play. Whats your opinions

Link to comment
Share on other sites
Kinarfi Veteran

Kinarfi

Posted
Posted

Having just put new shocks on and had that problem, If you can weld, get a piece of 1/4" flat metal, drill a 1/2" hole in it and cut the outside to match the Trooper shock mounts, leaving room for the welding bead and weld it in. If you have a lathe, drill out the center of the stock bolt to 1/2" and shim the new 1/2" bolt on both sides, I have shims in mine and I think I like it that way.

Depending on how wide the ball is, I would not try that as drilling the ball would be a hassle(major) and then you would have to spacer both sides of it to keep it centered.

As I think about your installation, I think I like the way mine was set up with the hole in the ball being larger than 1/2" and they supplied spacers that went inside the hole and had a 1/2" hole in them. Actually, pretty slick, now that I think about it.

2579424400104282158DdQuNu_th.jpg 2035047210104282158JbxaWl_th.jpg2454759670104282158RWsXWj_th.jpg

Kinarf

Link to comment
Share on other sites
charlie Experienced

charlie

Posted
  • Author
Posted

Ok thanx for input maybe I'll get lucky and the bolts will fit ya right!!! I was gonna take the balls to a machine shop see what they think I wasnt gonna drill them on my own! Welding I though about that but I don't wanna spend. A lot of money in welding I only have use of a kinda shitty welder don't trust it for that! I'll keep u posted thanx

Link to comment
Share on other sites
charlie Experienced

charlie

Posted
  • Author
Posted

I will try to post a pic tomorrow family day with my son today. I actually brought one of the new shocks and old bolt to machine shop and having spacers made outside diameter will be size of shock bolt inside diameter will be half inch for new bolt and about 16th or so thick. The guy was like I will make them 7$ ea but they won't be very strong on there own I said wen its all bolted together and it's in the frame it should be

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Buddee
      2010 500 - New Carb- Hesitation
      By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • buckrub
      trying to finish assembly "new" 2021 Coleman ut 400
      By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • Randyh79
      Hi new member, Randy from East Texas
      By Randyh79
      Just bought a Bad Boy Bandit 750. Need to change the oil and filter. Any suggestions would be greatly appreciated. I'm pretty sure this a Hisun 750 Sector even though it says it's a Bad Boy. I'll include pics soon.  
    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • hdtran
      Hello from New Mexico!
      By hdtran
      Hy (pronounce he), just bought a Hisun Sector E1.
      I'll be using it to haul logs and stuff in the Sangre de Cristo mountains.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...