By Steve Vanvelzen
I Recently purchased a Massimo T-Boss 550F last fall with their 60" snow thrower because I couldn't find a decent UTV here in Southern Ontario; nothing in stock anywhere. I am having really bad buyer's remorse after spending time on it and reading all the bad online reviews. The company boasts the fact that it is built in Texas, USA, so I was hoping to do the right thing by buying, "Made In North America" but it is still Chinese Junk, assembled in the USA. and I am starting to realize that I am going to have a lot of difficulty getting parts for this thing; I can't even get an oil filter, finally bought a "Hisun" filter and hope it fits. i busted the shear pins in the snow thrower and can't find replacements for that either. The thing is so hard to change gears most of the time; I am terrified I am going to wreck something. The place I purchased it from is absolutely useless. Can I adjust something myself? Anyone out there have this problem and have some advice (besides selling it and buying a good brand)?
I just recently purchased a
Hi Everyone. I'm new here. I recently purchased a 2016 RZR 570 Trail. I was looking for the Polaris drive belt number in the manual, but they don't list the belt number there. Does anyone here know the Polaris Drive Belt part number? Why wouldn't they list a part number for that critical part?
I have an American Landmaster LM500 with an old style snow plow hook-up. Unfortunately, the mounting bracket broke & I lost the key part where the plow receiver connects to the cross bar with two pins.
I checked with customer service & they said...
On Monday, January 10, 2022, 03:25:29 PM EST, Feedback <[email protected]> wrote: Sounds like it may be the old style push tube universal mount system, it looks like those have been discontinued but we may still have some back there. I believe they are sold as a kit though and they are not cheap, part # 15329. I’ve included a photo below since the web store does not have a photo for that part.
I checked with our parts department and neither the kit or the components are available as that was the older style hook up system. The only option at this point would to have something manufactured. All of our current plows are either dual actuated or winch hookup so we would only have components for those models as of currently.
In the picture, below, it would be item #5 (the one with the two mounting brackets that hold the pins that the plow mount latches onto) - not the top one in the picture, but the one below t hat.
I have all the other parts - but the missing part is critical to mounting the plow.
Does anyone happen to have an old one they could part with - or have an alternative solution?
The rig wasn't optimal, as you had to use the winch to raise & lower the blade & manually adjust the angle. It kept falling off when I was plowing snow - as the pins that hold it in only have a groove for a pin clip & they would often get knocked off & then the plow would hang down & you'd loose the pin - then it would get all messed up.
Thanks in advance for any advice. I am thinking of going to a welding shop to see if they can create something - but it will still have the same limitations as before - the pins are highly specific and not cheap
15331 Pin, Shear Univ Mount Blade PART #: 15331
By Chris Miller
Good Morning Folks..Happy New Year, I have been having some intermittent issues with my 2015 American Landmaster LM500 not going into neutral. Seems if I shut the engine off it would pop into neutral. Yesterday I was splitting firewood with a 500 pound log splitter that I pushed to my wood area up a slight grade. I was not able to get it into neutral which I assumed was due to the pressure of the weight of the splitter pushing back. after I finished splitting wood, I used the weight of the splitter to roll back down the hill to my driveway. I unhooked the splitter but still could not get it to go into neutral or start. I dragged it back into my barn with my mower as I don't leave anything outside over night. I am at a loss what to check to try to fix this. I use my UTV (Eustas) every day that I am at my place where I keep it and will be lost without it. Thoughts?