Quantcast
Jump to content

Hydraulic clutch setup

rwwiefer

By rwwiefer
in Joyner UTV SxS Forum

 Share

Recommended Posts

rwwiefer Contributor

rwwiefer

Posted
Posted

Hey guys, I picked up a used slave cyclinder with a bracket on ebay, I believe it was off a trooper. I alreay had a 7/8 CNC master cylinder off a class 1600 off road buggy. The bracket does fit the hols in the tranny but won't work on my commando because of the stack exhaust. Does anyone have some pictures of how there slave and master cylinder are mounted. Fabrication is not a problem but with the clutch angle and getting the master low enough for the proper throw it is pretty close to the tie rod. In a violate nose dive not sure if it would hit.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • joeam
      2018 Landmaster Tw450E will not run down the road?
      By joeam
      I have a 2018 TW450E that runs in my yard and slow good just will not go down the road seems to be running out of fuel where should i start? I have replaced both fuel and air filter drained gas and tried a small auxiliary tank same issue i have ordered a new vacuum fuel pump to try next anyone in Texas that works on these?
    • goindeep
      Trooper Fuse Diagram????
      By goindeep
      Well now i could use a lil help... i have a trooper in my shop now that has wiring issues... this poor guy paid another shop $1000 to re wire the body control harness, and boy oh boy did they chop it up!!! I am Buillding a new harness from scratch... what i need is a diagram that tells me what each fuse and relay control on the Engine fuse/relay block.. any help is greatly appreciated!!
      Josh
      No Limitz
    • lowgear52
      trooper rear differential
      By lowgear52
      Does anyone out there have a rear differential for a trooper for sale?
    • Haskellz
      Hello guys
      By Haskellz
      Hello guys!! I just joined the forum so there are so many things I don't know yet, I hope to have the help of the boards, and I really want to get to know you all on the forum.
    • Michael Flippin
      Massimo T-Boss 410 Starter Spins But Does Not turnover
      By Michael Flippin
      I have a 2023 T-Boss 410. The starter is just spinning but nothing is turning over. It was working fine and just stalled. Tried to restart and starter just spins. Thought maybe the interior of the starter broke. Ordered and installed a new starter and it does the same thing. You just hear the starter spinning but does not seem like anything is catching. I checked the gear the starter engages and that is clean and turning freely. Any idea what the issue could be?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...