Quantcast
Jump to content


Recommended Posts

Posted

As of recent my 4wd stopped working, when turned on it comes on when it wants to or doesn’t come on at all.

When trying to climb something in 4wd you can hear a loud click/clung every little bit, I assume it’s the 4wd trying to engage. Sometimes it comes on/off/on/off all during one hill climb.

Any thoughts/suggestions?

Posted

assuming Renli has the same front end as a trooper,here's a few possibilities

1 could be a bad switch or connection not supplying power. do you hear the motor in the box run for a second or 2 every time you switch it?

2 the black box that's bolted to your front diff has water in it, remove it, stick a nail or something in the hole and activate, see if it moves in and out, open it up and inspect. report finding, how much water have you been in?

3 the teeth of the gear that slides over the other gears to lock in the front may be worn and have a burr on then on them, you may have to open up the diff. do 1 & 2 and let us know what you find, photos help.

May I suggest you fill out the profile so we can get to know you better, maybe there's some one just a block or two away that would want to help you.

Posted

assuming Renli has the same front end as a trooper,here's a few possibilities

1 could be a bad switch or connection not supplying power. do you hear the motor in the box run for a second or 2 every time you switch it?

2 the black box that's bolted to your front diff has water in it, remove it, stick a nail or something in the hole and activate, see if it moves in and out, open it up and inspect. report finding, how much water have you been in?

3 the teeth of the gear that slides over the other gears to lock in the front may be worn and have a burr on then on them, you may have to open up the diff. do 1 & 2 and let us know what you find, photos help.

1. When you say hear the motor in the box run what do you mean, the black box bolted in front? After being in 4wd for about a minute the black box starts beeping really loud. When I shut it off it goes away and if I put back in 4wd it comes back after a minute.

2. I just put a new black box on my Renli last week hoping that was the problem, didn't seam to help.

3. This will have to be my last resort, I don't want to open the diff.

Posted

sorry to hear that is it under warrenty??

Yes it is, however I don't have a trailer right now to get it into a shop. I was hoping it could be something easy but after talking with JMC it looks like it will need some parts to be replaced.

Posted

Beeping? you must have something different than I do, mine has a motor that drives a gear the pushes a pin and when it reaches the end, it's supposed to stop. the electronic inside don't like water and the box doesn't seem to seal well and leaks which destroys the insides.

Posted

The Renli's have 2 electronic parts to the 4wd system, one is a little black box that sends the signal to the electric motor on the diff. When there is a malfunction with the 4wd the box "beeps" to let you know there is something wrong.

I replaced the box that send the signal, that didn't solve my issue. It is most likely the electric motor on the diff, when I put it in 4wd the motor doesn't do anything or make any sounds so I'm assuming it's dead or only works sometimes.

Posted

went to jmc.com and looked up the 2wd-4wd controller, definitely different than my set up. FYI, it's on the last page under electrical parts.

PS, don't throw the dead unit away, I would like to do an autopsy on it, see if it's something I can fix.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By HISUN Sector 750 EPS Failu
      "Mrs. Smith" doesn't like how loud our Sector 750 is.  On a HISUN forum someone said the same thing about his 750.  I haven't given it much thought because I've been more focused on stuff that has broken.
      So, I used my decibel meter to check ours out.  4000 RPM, Low gear, under 20 MPH . . . . 97 decibels.  That's above most ordinances, even state boat noise limits.
      AI Overview Ninety-seven (97) decibels is considered very loud and dangerous to hearing with prolonged exposure, roughly equivalent to a newspaper press, a loud nightclub, or a snowmobile. At this level, damage can occur after just 30 minutes, necessitating hearing protection
    • By Sharon
      The center console is not working, anyone know how to fix it? 
    • By CKfrustration
      I have a Hisun Sector E1 UTV.  Worked pretty good for a while but then started to run into issue with gear grinding noise.  Will not engage in forward or reverse.  When put into forward or reverse and press pedal can hear a whiring noise as if something is supposed to be engaging but is not.  Occasionally it will grab in jolt forward momentarily but then ceases.  No error warnings or codes given.  Due to money restrictions, I really need to fix this myself.  Has anyone had this problem and what could it be that is needed.  Any help is appreciated.  Thank you!
    • By kmiller7351
      Trying to get running a 550 Colman running but I think head gasket went bad. Do i just replace with new gasket, clean up and replace or is there more to it?
    • By Jarheadtx
      I have a 2020 Sector E1. It's been a great UTV over the years and I did a lithium battery upgrade a few years back (complete game changer). Since owning the unit the dashboard and lights would occasionally flicker while driving, but not every time. I couldn't replicate the issue in any driving scenario and all fuses are good. The dashboard and several switches finally died completely this past weekend - meaning lights, winch, and dash lights do not work, but forward/reverse and speed work. I rechecked the fuses and all look good - any ideas on what else to check?
×
×
  • Create New...