Quantcast
Jump to content

2014 Big meat run in Disney, Ok. March 21-23


Recommended Posts

I've seen several posts from some rock crawlers on here and was wondering if anyone is planning on going? Its a big event that brings in 8-10 thousand people every year. Everything from pro rock buggies to the average guy with stock rigs on down to Atv's. It's a great time for all. Will be a lot of razor owners out there, so I want to show off my T2. Nobody I know around here has ever seen one up close. I will be there all three days.

Link to comment
Share on other sites

Hi Charlie,

you can Google Big meat run 2014 Disney Ok. for all the details. Extreme to mellow rock crawling, also has miles of Atv trails. Its open to anyone who wants to play or just follow along and watch. Youtube has lots of clips from the last few years. It's held in N.E. Oklahoma at a small town called Disney on Grand lake. All the trails are below the dam in the limestone river bed. This is a unique place because there are 3 different flood gate spillways that are above the river level so it stays dry most of the time. I'll try to Post some pics this evening. I'm headed up there in about an hour.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By joeam
      I have a 2018 TW450E that runs in my yard and slow good just will not go down the road seems to be running out of fuel where should i start? I have replaced both fuel and air filter drained gas and tried a small auxiliary tank same issue i have ordered a new vacuum fuel pump to try next anyone in Texas that works on these?
    • By Robert B
      Going down a 20 deg hill engine is holding UTV back. Then something releases like going into Neutral and makes a loud clacking noise. Have to use brake to slow UTV down. Then once level it shifts back into gear. Have done shift extension does not pop out of gear.
    • By johnpeter
      2021 Polaris RZR Pro XP Sport On Ebay
      https://www.ebay.com/itm/186327903747?

    • By trevor
      my hisun 400 has ben leaking oil out of a small metal tube on the bottom near the oil filter. Got the side by side given to me after been sitting for a couple years  but 2 quarts in nothing happened my buddy went and worked on it and put another quart in it. i thought it just pushed out what it didn't need. but its dry as a bone inside. does have a good clatter coming from the top end as well, with oil in it. looking for some help not much on the internet about these things.
    • By Irons
      Hopefully this helps somebody because I couldn't find any info on this runaway condition.

      Drove 1/2 mile to the gas station and when I started up to leave the starter stuck on. Turn key off starter is still running~! Limp it home wondering what the heck to do, get it in the garage and pull the negative battery terminal to get it to stop. Whew, WTF?

      Calm down and start checking things, starter is hot of course but nothing is smoking and nothing smells burnt. Pull battery cover off and start checking wires from battery to relay and relay to the starter. OK good nothing is hot, nothing is crispy and nothing is melted. Probably smoked the starter though. If this had happened to my wife and I wasn't around the machine would have run until the battery died and probably melted down/burned.

      I'll get to the point to save you folks some time and trouble. Because this is a kymco machine you need 2 different Kawasaki parts to make this repair, and information is scarce to say the least. The switch and a sub harness to connect it to the machine's plug.

      Everything works now, but the starter sounds horrible so I'll be changing that too before spring.

      Good luck out there and hopefully this is just a freak occurrence, but if I were you I'd get rid of this kymco part and put the Kawasaki replacement in now.

      Switch, Magnetic is part number 27010-0767
      Sub Harness Start Relay is part number 26031-Y034
       
       

×
×
  • Create New...