Quantcast
Jump to content


Hi/Lo Cable Failure and Repair

mncasto

By mncasto
in Kawasaki UTV SxS Forum

 Share

Recommended Posts

mncasto Newbie

mncasto

Posted
Posted

I can no longer shift my 2011 4010 into Hi range. Using the shifter. I can manually pull the shift lever into high range and then the shifter can be used to push it back into low range. If the cable is a fixed length end to end and it's attached on both ends then there must be some magic going on somewhere. Does anyone know how this cable is constructed. Is it possible something is disconnected or broken in such a way that the cable can push but not pull?

  • 1 month later...
dcg9981 Newbie

dcg9981

Posted
Posted

There should be an adjustment at the bracket on the transmission side. I am currently having a similar issue, mine still goes into high gear nut you have to slap it in or when you touch the throttle it grinds, I believe this is linkage issue, I am going to try adjusting it out and see what happens.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • Fmaxiron
      Honda Pioneer 1000-6 back windshield or screen.
      By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • Jamie 67
      Why is there 2 different length keys for my tboss 1000
      By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • RBonds007
      2019 Cub Cadet Challenger 400, trailer to transport the Challenger, and new, never used winch for sale
      By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











    • Stan M
      Snowblower cable routing on Massimo 760L
      By Stan M
      I have a 2026 Massimo 760L and also the Massimo snowblower attachment and would like to do a permanent install on the control cable and switch. Does anyone have a recommendation regarding the routing of the cable and mounting of the control switch?
       
    • Stan M
      Shift lever stuck on 2026 Massimo T-Boss 760L
      By Stan M
      I just received my 760L a couple of days ago and it's been difficult to shift between gears from the get go. At first I could rock the unit and it would free up for a while but now it's just stuck in reverse and rocking doesn't work. I had the UTV delivered directly from Massimo and there aren't any service centers in my area. Any ideas? Thanks

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...