Quantcast
Jump to content


PRO 2500 ATV UTV Side By Side Lift Table for Sale $1799

NHPROEQUIP
 Share

Recommended Posts

NHPROEQUIP Apprentice

NHPROEQUIP

Posted
Posted

The PRO 2500 is an air/hydraulic 48" Hi Rise Heavy Duty Lift Table. Once the vehicle is loaded and raised to working height, side extension panels can be arranged in a configuration of 2, 3, or 4 to accommodate different vehicles. 4 piece panel (quartered) side extension kit (15 1/4" W x 46" L) with 2 ramps 40" L x 15 1/4" W, and is ideal for Motorcycles, ATVs, UTVs, Trikes, Spyders, Golf Course Equipment, and other commercial use.

The lift table with side extensions measure 60"W x 93"L, and the ramps measure 40"L x 60" W.

CALL CLARK HEINTZ TOOLS & EQUIPMENT LLC AT 603-234-2612 OR VISIT:

http://www.nhproequip.com/pro-2500-48-high-rise-air-utv-motorcycle-lift-free-shipping

PRO 2500 48" High Rise Air/Hydraulic Lift Includes:

5 YEAR WARRANTY ON STRUCTURE
2 YEAR WARRANTY ON HYDRAULICS
FREE SHIPPING
* 1. Free Shipping to Commercial Location with means to offload.
* 2. Home Deliveries: We still pay the shipping, but customer is responsible for home delivery charges.

Air/Hydraulic control unit
2,500 lb Capacity Lift with Maximum Lift Height: 48"
4 Piece Side Extension Kit, expanding the lift table to 60" wide
40" Detachable Drive-On Loading Ramp Set (3) features low angle to protect vehicles and stays positioned on the ground when lift is raised, easily moved aside
Adhesive Back Grip Strips for Loading Ramps
Drop Panel for Rear Tire Change
Rubber Lined Wheel Vise
Super Heavy-Duty Hydraulic Cylinder Assembly
High Quality and Dependable Locking Mechanism
Extra Wide Roller Bearings in Scissor Mechanism
Smooth Finish Table Top for Easy Cleanup
Work Table has multiple welded cross members underneath to support the heaviest of vehicles
Equally Spaced Holes on Table Edges to Accept Tie Downs
9 Position Safety Locking System secures lift in place while working, max height 48"
Grease zerks on X frame maintains smooth operation
Powder Coated Finish for durability

PRO 2500 48" High Rise Air/Hydraulic Lift Specifications:

Weight Capacity: 2500 lbs.
Method of Lift: Air / Hydraulic
Power Unit: Air Control unit
Full Raised Height: 48"
Low Height: 7.87"
Table Length With 40" Loading Ramp: 133"
Table Width without Sides: 29.5"
Table Width with Sides: 60"
Loading Ramps: Main ramp 40"L x 29 1/2"W (1), side ramps 40" L x 15 1/4" W (2)
9 Locking Positions: 22 3/7", 27 1/6", 31", 34 1/4, 37", 39 1/2", 41 3/4", 43 3/4", 45 2/3"
Lift, Air Control, Wheel Vise, and X Wide Side Extensions Weight: 967 lbs. (4 separate packages)

post-3581-0-62046800-1454435718_thumb.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • SkyPilot56
      working on a coleman 550 out fitter
      By SkyPilot56
      working on a coleman 550 out fitter , had a shit load of codes, coil, injector , and the map sensor for fuel injector replaced all 3 and figured it would start , but no joy have spark (new plug also and inline fuel filter) cleared the codes and still have the engine light , turns over fine but damn thing still will not start, friends daughters were driving it and turned it off to park , and went back to start it and same thing turns over but will not start , with this machine anyone have any ideas as to what the hell , I should be looking for , no plug's unplug checked wires none seem to be pulled apart or broken !
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • A P
      2022 Hisun Sector 550 eps. Power steering not working
      By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • clint501
      Hisun E1 charger not working
      By clint501
      I recently purchased a Hisun E1 and the other day the charger stopped working properly. The LED on the dash blinks red & green and the light on the side of the charger also blinks red & green. The fan on the charger does not come on like it used to do. There is no error code that I can see. Does anyone have any suggestions to remedy this?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...