Sxs trail clutch
-
Similar Topics
-
By Keith k
Just got this kymco 450i Uxv from a guy, drove it around before I paid. Got home drove around town a little while the next day and it started squealing and amd didn’t want to go. Got to looking at the clutch, that’s were the noise is coming from, the primarily sounds like. Maybe a bearing in there cause the grinding noise and it only makes the noise when you go to move.
-
By skittle021
So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
Photos:
-
By JimmyBlanchard71
Was driving the buggy-1100 when gradually it quit running. No water in oil smells like Burt clutch.you can hear the starter spinning but it won’t fire up…sounds like the starter will spin but not engaging. Engine smoked but no notable mechanical sounds
-
By Andy Dickerson
Does anyone know which JBS Clutch kit will work on the Hisun 700. I talked to JBS and he said he knows they sell them to Hisun owners and the 660 kits will fit the 700 but he's not sure which items in the kit Hisun owners have had success with. Not sure if there are any other Hisun forums where I could find this information.
Anyone here used a JBS kit for a Hisun?
Thanks
-
By Bob Marshall
I know this topic has come up many times before but I see nothing that duplicates my issue. I replaced the wet clutch and after reinstalling the primary things changed. i had to realign the weights in the clutch because they came out of the slot. Now I have a knocking in the clutch that I cant find the source . I know the one way bearing is correct - spins clockwise and turns the crank if turned CCW. I have included the YT link. The primary is engage enough at idle that I cant put in gear while its running. Idling @ 1300 rpm. Tried new belt and old belt with no improvement. I am not sure the primary should be turning at idle which points to the wet clutch? I started the engin with the primary off and no knocking occurred
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.