Quantcast
Jump to content


Happy 30th MULE!!

Travis

By Travis
in Kawasaki UTV SxS Forum

 Share

Recommended Posts

Travis Grand Master

Travis

Posted
Posted

Evolved from a simple napkin sketch to a purpose built two-seat utility vehicle, Kawasaki revolutionized the side-x-side (SxS) utility vehicle segment with the introduction of the MULE 1000, 30 years ago. Kawasaki saw a need in the market that was being underserved by the ATV segment, which generated the idea for a two-seat, four wheel utility vehicle.

It took nearly seven years of development by Kawasaki’s Research and Development team to bring the first MULE 1000 SxS to production in 1988. The design team worked through a variety of engines and designs, to meet the needs of the ranchers and farmers eventually incorporating a 454cc liquid-cooled parallel twin, which was taken from its cruiser lineup. The engine was large enough to support the 500lb carrying capacity and two riders, and quiet enough not to scare animals out on the farm, according to the company.

Codenamed “Pony” by Kawasaki Heavy Industries, LTD in Japan, a production name was needed for the new utility vehicle. The advertising agency for Kawasaki Motors Corp., U.S.A. at the time, Bozell Advertising, pitched using the acronym Multi-Use Light Equipment or MULE for the new SxS line – thus the MULE was born.

Today, the MULE has evolved with the inclusion of four-wheel drive, locking differentials and other advanced features. But at the heart of every MULE (which are assembled in Lincoln, Neb.) is the company’s original 30-year old SxS in a growing powersports category.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • jertex
      Shift cable problem, 2017 Stampede 900, need advice
      By jertex
      I bought a 2017 Stampede 900 last fall that was new, old stock with less than 5 hours on it thinking that I would be getting a relatively trouble free UTV as compared to buying a used Polaris or CanAm, or Honda, etc. It's been a little quirky, but reliable. What I thought was just a minor issue with this model, the difficulty in shifting between R, N, L, H, etc., was just a characteristic of this model is now a big problem. I had to climb two very steep trails to get to the upper meadow of our hunting property, which seemed to stress the UTV more than usual since I was carrying some lumber to work on a platform for a hunting blind, and when I went to shift into park, I felt something give and it would not shift out of low, but it did move up into high gear.  I couldn't get it to shift at all at that point and the shifter felt mushy for lack of a better word. I was able to get it down to the lodge and when I investigated, I discovered that the straight, metal tube portion of the shift cable had bent to almost 90 degrees (see pics). I'm positive that it had already had some deformation that had happened previously and it had the right amount of resistance to bend to the point where it was unusable. 
      I have two questions:
      1. I suspect that there must be some other issues that makes this UTV difficult to shift, and I'm wondering if this is a common problem and if someone could enlighten me on what could cause this to be difficult to shift?
      2. Have any of you had this happen and if so, how difficult is it to replace the shifter cable?
      Any other advice is welcome, this is the first UTV that I've ever owned, so I don't know much about working on these or maintaining them. I'm relatively capable when it comes to working on my own vehicles in general, and I'm not afraid to take things apart and get my hands dirty.
      Thanks in advance for any insight, I'll be traveling most the day so I won't get a chance to look at replies until this evening.


       
    • Debbie Hogan
      1999 kawasaki mule 550 c3 exhaust pipe oem part 496021126
      By Debbie Hogan
      I realize this part is discontinued but im trying to find this exhaust pipe fir my dads 550.  His brother who has since passed bought this mule for my dad who is now 90 and he is trying to fix everything on it.  I'm willing to take a used one.  A new one would be great if someone still had in stock.  I'll take anything as long as it is in workable condition.   If anyone has any ideas for me im open to hearing them.  Thank you so much.
       
      Debbie fm  Texas
    • Fmaxiron
      Honda Pioneer 1000-6 back windshield or screen.
      By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • Jamie 67
      Why is there 2 different length keys for my tboss 1000
      By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • mike.s.
      Kawasaki mule model 2010, 4x4, gas motor, sell or trade
      By mike.s.
      SOLD 
       
       
       
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...