Quantcast
Jump to content


Recommended Posts

Posted

Hi everyone,

Been driving my Massimo since January. Really pretty satisfied with it. I have done 1 oil change on it and have now over 1700 miles on it. I have one leaking seal on the axle at the diff, but that is pretty much it. I do have a curious thing that happens occasionally. When turning or coming in or off a trail at a pretty severe side angle, I get an occasional snapping sound. This sound is pretty loud  and can be felt in the footwell area. It doesn't seem to really affect anthing and there is no obvious or easily seen area where some kind of movement is happening. I'm wondering if the leaking diff seal is related to this popping sound. Could the axle be pulling out of the diff?

Thanks for any help

Mark

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Topics

    • By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • By Adrian Domingues
      I have 31 miles on my new T-Boss 550. In order to start I put in nentural and the emerage brake on and push down on brake paddle, then trun ket and get nothing, with key still on I shift to reverase and the back to netural and it starts.  Anyone know what is happening.
      Thanks for your help
    • By dilger
      Transmission vent leaks oil out of it after using 
    • By chadd
      Hi all, i have a 2021 gc1k  with the tbg eng, and i am needing frt cv axles, on a review of a oem intimidator axle on ebay the buyer stated that they were exactly the same as a 08-12 rzr 800? Has anyone else ran into thiz? When i look at the 2 side by side the only diff i see is the inner joint of the oem axle looks exactly like the outer joint,but the rzr axle inner joint has the slide deep cup? 
    • By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
×
×
  • Create New...