Quantcast
Jump to content

Kenda K530 Tires w/Wheels - $400


Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By FTR
      Hello I know I started this topic before but I have lost it.  So here is the story, I bought this XLT 500 earlier this year it is was and still is in rough shape the ID plate is gone, faded paint, bad window, etc...  When I got it, it ran rough and the all of a sudden  it quit running.  So I started looking into it and found no spark.  No biggie changed plug, and coil, still nothing.  So went and replaced the coil wire, still nothing.  So I have gone pretty far now.  I have replaced the stator magneto, the voltage regulator, CDI, I do have the crank shaft position sensor but have never figured out where it goes have been told around the stator but have yet to find it.  Have chased wire out and still nothing.  At the coil I have one wire giving good voltage the other one nothing, and when you crank it the voltage goes all over the place.  So besides the key I have changed every part that has to do with the starting that I can find.  So information on what I am missing or doing wrong would be great, it acts like the kill switch on the brakes is stopping it from starting, however I have bypassed that to make sure that was not the problem and still nothing.  So aside of parking this thing in the back and letting it die a slow death I am at a loss on what to do next, Help!
    • By Ric Silveira
      Got me a New Coleman Outfitter 2021 400
      and joining here to hopefully learn lots about it.
      I understand it's not top of the line but couldn't offord other. I'll be using it for riding around the neighborhood and light off reading here in Southwest Florida and not planing on beating it just some fun with my wife
    • By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary
    • By Hisunsadman
      I have recently acquired a 2012 CFMOTO 500 CC side by side. The previous owner said that it ran great but had a gas leak by the throttle body that caught fire and ruined most of the parts on top. It also melted the cover and fan for the stator. Does anyone know of a good place to get all of these parts? I usually use Amazon for all my 2020 hisun parts, but can't really find the ones I need for this. If anyone has any ideas I would greatly appreciate it. Thanks in advance
    • eManualOnline
    • By Josh Lounder
      I acquired an older HISUN BIG BUCK 500 that hasn't run in years.  Little elbow grease and she's running.  I have a few more parts to switch out but when revving the engine over 4K the r light starts blinking.  After googling and seeing other people I replaced the rev limit switch under the air box and found the same issue.  I traced the green and white stripe wire back to the computer module and found no breaks in the wire and cleaned the connectors.  Still same issue.  I then cut the wire right at the plug and grounded it directly to the battery.  I can now rev over 4k rpm however the light still blinks and when in reverse the light no longer lights up.  Anyone else run into this?  Can R light blinking mean something else.....HELP, what am i missing?????
  • Gallery Images


×
×
  • Create New...