Quantcast
Jump to content

Kawasaki issues PRO UTV recall


Travis

Recommended Posts

The following product safety recall is being conducted voluntarily by Kawasaki in cooperation with the CPSC. Consumers should stop using the product immediately unless otherwise instructed. For more information about recalls, visit CPSC’s website at http://www.cpsc.gov.

Name of Product: MULE™ PRO

Units: Approximately 1,000.

Distributor: Kawasaki Motors Corp., U.S.A., Foothill Ranch, CA

Hazard: There is a possibility that an incorrect grade of material was used to manufacture the ROPS crossmember of the roll over protective structure which does not meet the intended tensile strength.

Description: The recall involves 2018 model year MULE™ PRO DXT, DX and 2019 model year MULE™ PRO FXT, FX, and FXR utility vehicles.

Sold at: Kawasaki dealers nationwide from August 31, 2018 to September 22, 2018 for between $13,100 and $17,000.

Remedy: Consumers should immediately stop using the product and contact your Kawasaki dealer to schedule a free repair. The repair consists of replacing the ROPS crossmember.

Consumer Contact: Kawasaki toll free at 866-802-9381 from 8 a.m. to 5 p.m. PT Monday through Friday.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary
    • By Mike Turner
      After 5 years my 2016,  650LandMaster is needing normal wear and tear service. But I can’t find a dealer service center to perform any of the work because I didn’t purchase the UTV from them. “I’m not going to help you” I’m told, “find someone else”. And apparently there’s not a damn thing I can do about it. 
    • By Dreadnought
      I've searched the forum but don't think I found a solution.
      I just bought a used 2022 UT 400 with only 31 miles on it. Often I have to rev the motor just a little to get it to shift into forward or reverse. The original owner told me about this and said it needed the cable adjustment that you so often read about. It also jumped out of gear a few times and did grind a little but not very often and only under heavy load like going up a steep dirt road. After reading lots of posts I figured it must be the short shifter throw so I did the shifter extension modification. It didn't help at all. I thought, should I increase the idle speed? The tach reads about 1600 rpm at idle but it doesn't sound that fast to me. It doesn't seem like cable adjustment because it clicks right in gear with just a few more revs. Any ideas?
      Thanks for any wisdom.
       

    • By tangojay
      Wife and I took a guided tour while visiting Zion Natural Park and well,,,,, the bug hit us HARD. 
      We live in the White Mountains of Arizona, the is many street ATV’s and many trails within driving distance , thus a trailer is not needed for most.
      ‘Here is what we have in our “want” list, 4 seater, doors, street legal , front and rear windshield,,,,, we have not settled on brand or model, so here is we I hope you folks can help us.
      1) Should we buy new or used?
      2) What APR should we expect ( we both have over 800 scores) if we finance?
      3) If we buy used, what should we look for and how many miles is a no go? 
      4) I know it is subjective but, which brand is consider “premium” and which would be considered “entry” 
      Thanks for info you may provide ,
    • By TylerC
      I've been looking through manuals and trying to cross ref. but nothing is coming up. maybe someone who has changed the oil on it would know?
×
×
  • Create New...