Quantcast
Jump to content


Recommended Posts

Posted

I bought a "24" 550,my first impression was this thing is noisy,jerky,slow....But after 30 miles i changed the filter and oil to Mobil 1,immediate difference in engine noise,by the time i hit 40ish miles the belt had worn in and alot of the jerkyness stopped on takeoff,and running in low over bumps i was fighting the weak accelerator spring trying to hold steady rpm's so i put a stiffer spring 100% better and use only 93 octane it does not run well on 87.One problem with cabin noise is your sitting on the engine and its inside a big plastic hollow box that amplifies the sound,my next step is to add sound mat inside the box,So at 9k thats about right i paid almost 11k for mine new,bottom line is my father in law likes it over his honda pioneer 700,has more room and independent suspension,adjustable shocks,larger bed,with only 50miles on mine i cant say much on life of the machine but so far im liking it

  • Like 1
  • 2 months later...
Posted

Recently bought a Bighorn 550B at Tractor Supply. For the money it is equiped like far more expensive($5000-$6000 more) bigger name brands. Overall, I'm well pleased. However, I have noticed some slipping of the CVT belt. I'm hoping this will get better with time as I've only had it a few weeks. Anyone else have this problem?

 

Posted

Hi, when doe the belt slip? Not sure on the Big Horn, but if I'm not driving over 20 mph on my Bad Boy/Hisun I have to stay in low gear for the clutch to fully engage. Good luck with your Big Horn

Posted

My Hisun 550 (Coleman Outfitter stickers) does much better running in low gear.  I can get up to about 30mph without going deaf from engine noise and even that is 10mph more than I'd use around my property.

Like Randy said, and I agree, you'll have better full engagement in low and likely less wear as well.   I seldom use High anymore. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By amiracle40995
      I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have. 

    • By SkyPilot56
      working on a coleman 550 out fitter , had a shit load of codes, coil, injector , and the map sensor for fuel injector replaced all 3 and figured it would start , but no joy have spark (new plug also and inline fuel filter) cleared the codes and still have the engine light , turns over fine but damn thing still will not start, friends daughters were driving it and turned it off to park , and went back to start it and same thing turns over but will not start , with this machine anyone have any ideas as to what the hell , I should be looking for , no plug's unplug checked wires none seem to be pulled apart or broken !
    • By Aaron Colona
      Just bought a brand new 760 about a month ago. I'm at 20 hours which the book says is when you need to change the break in oil. 
       
      I must be crazy, but I can't find the oil filter. I've googled a million videos...everything seems to be 2019 or lower...and/or a 550.  They all show the filter easily seen by looking in past the rear passenger tire on the engine. There is absolutely nothing there on mine. 
       
      1.there seems to be very little info if you Google a 760, or anything Massimo newer than like 2019. 
       
      2. Does anyone have a current model year 760 that can answer my riddle for me? 
×
×
  • Create New...