Quantcast
Jump to content


Recommended Posts

Posted

I’ve never been around Coleman Utv machines. Do they have a good reputation, durable dependability. Could you compare them to yamaha rhinos or Polaris ranger

 

thanks in advance

Posted

I believe mine is a 2021 and they're not the best, but I've heard and seen that there is no perfect UTV out there, especially considering the higher costs for better name brands.

The main problems with the Coleman UTV, from what I've gathered, is that the shifter linkage (F N R) was not designed properly and it slips out of gear. The fix is to either purchase the upgrade shifter lever or modify the lever, which is what most people do. Once done, you're good to go.

The only other problem I've seen, other than individual UTV quarks, is that the front wheel alignment isn't fully adjustable. If I remember correctly, you can adjust the toe-in toe-out, but not the caster camber.

If you are getting it for a good price and can deal with the above, and hopefully no other problems that UTV might have, you should be okay. Mine is running great after taking care of the problems I had when first bought. But in my case, because my property is hilly, it's a bit under powered, but still does the job need it to do.

Posted

Coleman UTVs are or at least were,  Hisun made machines with Coleman stickers.

My Outfitter 550 from 2022 so far works OK on light to moderate land maintenance and snow plowing duty,  but is noisy and fairly "rough" around the edges.  This compared to my neighbors Honda machine, more "finish" and smoothness.  I guess you get that with the extra few grand in purchase price.

The shifter is "grouchy" sometimes hard to move, and tends to not engage fully on the F side, a known issue.  One dealer in PA made a video that worked for me.  Firm upward (F) pressure on the shifter as you start off will yield an almost imperceptible "click" that signals it is fully in F and it doesn't jump out of gear after that.  Just a quirk in this machine that is easily overcome.  

Don't expect luxury from Coleman/Hisun, or easy to find repair shops.   I was missing seat gromets when new, and the Coleman Customer Service (early  2022) responded quickly with the parts at no charge.   Keep it maintained and its an OK machine for general property maintenance.  I don't "off road" with it so not sure how it would hold up to that kind of use. 

Good luck.

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Skeeter22
      I going from a Yama Rhino and bought a 2026 Ranger 1000XP. I was riding and lost all steering. The steering wheel just spins freely. I have one other video of this happing but has anyone else experienced this.
    • By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • By mehe
      Hi everyone and I hope that is not a too forward questions for us newbies. 
      My husband and I are ready (next Spring) to open our newly developed nudist campground in Iowa and we are now looking for interesting activities to host. 
      Don't worry we are not going to try and sell you a membership because as of 2 weeks ago all of our 50 campsites are sold out for the 2024 season. 
      It was my job to sell site and now that is complete i am looking for interesting actives host for weekend. 
      We have 300 acres of woods, grassland, swamps and 2 small ponds/lakes and dozens of miles of riding trails.
      we have gotten county approval for the complete 300 acres to be clothing optional. 
      We think we have a great spot for a weekend or several day ATV / mudder event. 
      Clothing would be optional for all participants and plenty of room for overnight camping and outdoor group showers. 
      Now we are looking to you pro  ATV riders to let us know if you think your group of people would fit in with ours. 
      Feel free to ask anything you would like to get a better idea of what we offer.

×
×
  • Create New...